74HC126N

Teilpunkte

• The 74HC126N is a quad buffer with three-state outputs designed for use in high-speed logic circuits. It can be used to isolate different sections of a circuit and control when data is passed between them. The chip has four separate buffer gates, each with its own input and output pins, as well as an enable pin to control whether data is flowing through the chip.

• Equivalent

  Equivalent products of 74HC126N chip include SN74HC126N, MC74HC126N, and CD74HC126N. These are all quad buffer/line drivers with 3-state outputs and high speed performance, compatible with TTL inputs. These chips are widely used in digital electronics for signal buffering and line driving applications.

• Features

  The 74HC126N is a quad buffer/line driver with 3-state outputs. It has high noise immunity and low power consumption. It operates at a wide voltage range and can drive up to 15 LS-TTL loads. It is suitable for various applications such as memory-address drivers and bus drivers.

• Pinout

  The 74HC126N is a quad buffer/line driver with 4 channels and a plastic DIP-14 package. The pinout is as follows: Pins 1 and 4 are inputs (1A and 1B), pins 2 and 5 are outputs (1Y), pins 3 and 6 are inputs (2A and 2B), pins 8 and 11 are outputs (2Y), pins 7, 9, 10, and 12 are GND and pin 14 is VCC.

• Manufacturer

  The 74HC126N is manufactured by Nexperia, a Dutch semiconductor manufacturer specializing in discrete and logic devices. They design and produce a wide range of products for various industries including automotive, industrial, consumer, and computing. Their focus is on providing high-quality and reliable semiconductor solutions to meet the needs of their customers.

• Application Field

  The 74HC126N is a quad buffer with 3-state outputs, commonly used as a line driver for signals in digital systems, such as memory chips, microcontrollers, and FPGA applications. It is also used in applications requiring bus driving, signal buffering, and voltage level translation.

• Package

  The 74HC126N chip is a Quad 3-state buffer with Schmitt-trigger inputs. It comes in a DIP-14 package, which means it has 14 pins arranged in a dual in-line package. The dimensions of the package are approximately 19.3mm x 6.5mm x 3.2mm.