Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
Bestellungen über
$5000TI BQ24032ARHLR
Charger IC Lithium Ion/Polymer 20-VQFN (3.5x4.5)
Marken: TI
Herstellerteil #: BQ24032ARHLR
Datenblatt: BQ24032ARHLR Datenblatt (PDF)
Paket/Gehäuse: QFN-20
Produktart: Battery Chargers
RoHS-Status:
Lagerzustand: 9 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BQ24032ARHLR Allgemeine Beschreibung
The bqTINY™ III-series of devices are highly integrated Li-ion linear chargers and system power-path management devices targeted at space-limited portable applications. The bqTINY III-series offer integrated USB-port and DC supply (AC adapter), power-path management with autonomous power-source selection, power FETs and current sensors, high accuracy current and voltage regulation, charge status, and charge termination, in a single monolithic device.
The bqTINY III-series powers the system while independently charging the battery. This feature reduces the charge and discharge cycles on the battery, allows for proper charge termination and allows the system to run with an absent or defective battery pack. This feature also allows for the system to instantaneously turn on from an external power source in the case of a deeply discharged battery pack. The IC design is focused on supplying continuous power to the system when available from the AC, USB, or battery sources.
The power select pin, PSEL, defines which input source is to be used first (primary source AC or USB). If the primary source is not available, then the IC automatically switches over to the other secondary source if available or the battery as the last option. If the PSEL is set low, the USB input is selected first and if not available, the AC line is selected (if available) but programmed to a USB input limiting rate (100 mA/500 mA max). This feature allows the use of one input connector, where the host programs the PSEL pin according to what source is connected (AC adaptor or USB port).
The bq24038 replaces USBPG with pin VBSEL, to enable user selection of the charge voltage. In addition, pin ACPG was modified to PG. PG is active low when either ac power or USB power is detected.
The ISET1 pin programs the battery&3146;s fast charge constant current level with a resistor. During normal AC operation, the input supply provides power to both the OUT (System) and BAT pins. For peak or excessive loads (typically when operating from the USB power, PSEL = Low) that would cause the input source to enter current limit (or Q3 - USB FET limiting current) and its source and system voltage (OUT pin) to drop, the dynamic power-path management (DPPM) feature reduces the charging current attempting to prevent any further drop in system voltage. This feature allows the selection of a lower current rated adaptor based on the average load (ISYS-AVG + IBAT-PGM ) rather than a high peak transient load.
Funktionen
- Small 3.5-mm × 4.5-mm QFN Package
- Designed for Single-Cell Li-Ion- or Li-Polymer-
Based Portable Applications - Integrated Dynamic Power-Path Management (DPPM)
Feature Allowing the AC Adapter or the USB Port
to Simultaneously Power the System and Charge
the Battery - Power Supplement Mode Allows Battery to Supplement
the USB or AC Input Current - Autonomous Power Source Selection (AC Adapter
or USB) - Integrated USB Charge Control With Selectable
100-mA and 500-mA Maximum Input Current Regulation
Limits - Dynamic Total Current Management for USB
- Supports Up to 2-A Total Current
- 3.3-V Integrated LDO Output
- Thermal Regulation for Charge Control
- Charge Status Outputs for LED or System Interface
Indicates Charge and Fault Conditions - Reverse Current, Short-Circuit, and Thermal
Protection - Power Good (AC Adapter and USB Port Present)
Status Outputs - Charge Voltage Options: 4.1 V, 4.2 V, or 4.36 V
- APPLICATIONS
- Smart Phones and PDAs
- MP3 Players
- Digital Cameras Handheld Devices
- Internet Appliances
All other trademarks are the property of their respective owners
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Number of series cells | 1 | Charge current (max) (A) | 1.5 |
| Vin (max) (V) | 16 | Cell chemistry | Li-Ion/Li-Polymer |
| Battery charge voltage (min) (V) | 4.2 | Battery charge voltage (max) (V) | 4.2 |
| Absolute max Vin (max) (V) | 18 | Control topology | Linear |
| Control interface | Standalone (RC-Settable) | Features | BAT temp thermistor monitoring (hot/cold profile), Integrated LDO, Power Path |
| Vin (min) (V) | 4.35 | Rating | Catalog |
| Operating temperature range (°C) | -40 to 85 |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The BQ24032ARHLR chip is a highly integrated battery charger with an integrated power path management. It is designed for single-cell Li-Ion and Li-Polymer battery charging applications. The chip operates from various input sources, including USB ports and adapters. It provides several safety features such as over-voltage protection, thermal regulation, and undervoltage lockout. The BQ24032ARHLR chip is commonly used in portable electronic devices as an efficient and reliable battery charger solution.
-
Equivalent
The equivalent products of the BQ24032ARHLR chip are BQ24031ARHLR and BQ24033ARHLR. -
Features
The BQ24032ARHLR is a linear battery charger with an integrated pass device. It has a programmable charge current up to 800mA, a JEITA compliant temperature monitor, and provides power-path management to power the system while the battery is being charged. It is designed for single-cell lithium-ion or lithium-polymer applications. -
Pinout
The BQ24032ARHLR is a 20-pin integrated circuit with the following pin functions: VBUS, D-, D+, USBID, CE/EN, STAT, PG, AC, BSI, TS, EN, VBAT, TS2, BAT, GND, TS1, REGN, SYS, IN. -
Manufacturer
Texas Instruments is the manufacturer of the BQ24032ARHLR. It is an American semiconductor company that designs and manufactures integrated circuits and other electronic components. -
Application Field
The BQ24032ARHLR is a battery charger IC with applications in portable devices such as smartphones, tablets, and other battery-operated gadgets. It provides features like adjustable charge current, thermal regulation, and battery detection, making it suitable for a range of battery charging applications. -
Package
The BQ24032ARHLR chip is available in a VQFN package type. It has a form factor of 4.0mm x 4.0mm and a size of 16 square millimeters.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
