CY29FCT520ATSOC

CY29FCT520ATSOC Allgemeine Beschreibung

The CY29FCT520T is a multilevel 8-bit-wide pipeline register. The device consists of four registers, A1, A2, B1, and B2, which are configured by the instruction inputs I₀, I₁ as a single four-level pipeline or as two two-level pipelines. The contents of any register can be read at the multiplexed output at any time by using the multiplex-selection controls (S₀ and S₁).

The pipeline registers are positive-edge triggered, and data is shifted by the rising edge of the clock input. Instruction I = 0 selects the four-level pipeline mode. Instruction I = 1 selects the two-level B pipeline, while I = 2 selects the two-level A pipeline. I = 3 is the hold instruction; no shifting is performed by the clock in this mode.

In the two-level operation mode, data is shifted from level 1 to level 2 and new data is loaded into level 1.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Funktionen

• High-Speed Storage Access
• Low Power Consumption
• Fault-Tolerant Designs
• Persistent Data Storage
• Data Encryption Support
• Secure Data Transfer
• Symmetric and Asymmetric Key Support

Spezifikationen

Parameter	Wert	Parameter	Wert
Configuration	Universal	Bits (#)	8
Technology family	FCT	Supply voltage (min) (V)	4.75
Supply voltage (max) (V)	5.25	Input type	Standard CMOS
Output type	3-State	Clock frequency (MHz)	70
IOL (max) (mA)	64	IOH (max) (mA)	-32
Supply current (max) (µA)	200	Features	High speed (tpd 10-50ns), Partial power down (Ioff)
Operating temperature range (°C)	-40 to 85