Microchip DSPIC33FJ256GP710-I/PF
MCU 16-bit dsPIC RISC 256KB Flash 3.3V 100-Pin TQFP Tray
Marken: Microchip Technology, Inc
Herstellerteil #: DSPIC33FJ256GP710-I/PF
Datenblatt: DSPIC33FJ256GP710-I/PF Datasheet (PDF)
Paket/Gehäuse: TQFP-100
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 2752 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMDSPIC33FJ256GP710-I/PF Allgemeine Beschreibung
Digital Signal Controller-Dsc, 16 Bit 256Kb 40Mhz 3.6V Tqfp-100; Product Range:Dspic33F Series; Core Frequency:40Mhz; Flash Memory Size:256Kb; No. Of I/O S:85I/O S; Embedded Interface Type:Dci, Ecan, I2C, Spi, Uart; Adc Channels:32 Rohs Compliant: Yes |Microchip DSPIC33FJ256GP710-I/PF
Funktionen
- Operating Conditions
- Up to 40 MIPS operation
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- High-performance dsPIC33F core
- Code-efficient (C and Assembly) architecture
- Two 40-bit wide accumulators
- Single-cycle (MAC/MPY) with dual data fetch
- Single-cycle mixed-sign MUL plus hardware divide
- Clock Management
- Programmable PLLs and oscillator clock sources
- Fail-Safe Clock Monitor (FSCM)
- Independent Watchdog Timer (WDT)
- Fast wake-up and start-up
- Power Management
- Low-power management modes (Sleep, Idle, Doze)
- Integrated Power-on Reset and Brown-out Reset
- 2.1 mA/MHz dynamic current (typical)
- 50 μA IPD current (typical)
- Advanced Analog Features
- Two ADC modules: - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H - 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices
- Flexible and independent ADC trigger sources
- Timers/Output Compare/Input Capture
- Up to nine 16-bit timers/counters (Can pair up to make four 32-bit timers)
- Eight Output Compare modules configurable as timers/counters
- Eight Input Capture modules Communication Interfaces
- Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and IrDA®
- Two 4-wire SPI modules (15 Mbps)
- Up to two I2C™ modules (up to 1 Mbaud) with SM Bus support
- Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with CAN 2.0B support
- Data Converter Interface (DCI) module with I2S codec support
- Input/Output
- Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for non-standard VOH1
- 5V-tolerant pins
- Selectable open drain, pull-ups, and pull-downs
- Up to 5 mA overvoltage clamp current
- External interrupts on all I/O pins
- Debugger Development Support
- In-circuit and in-application programming
- Two program and two complex data breakpoints
- IEEE 1149.2-compatible (JTAG) boundary scan
- Trace and run-time watch
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer | Microchip | Product Category | Embedded - Microcontrollers |
Series | dsPIC 33F | Packaging | Tray Alternate Packaging |
Package-Case | 100-TQFP | Operating-Temperature | -40°C ~ 85°C (TA) |
Supplier-Device-Package | 100-TQFP (14x14) | Number-of-I-O | 85 |
Speed | 40 MIPs | EEPROM-Size | - |
Core-Processor | dsPIC | RAM-Size | 30K x 8 |
Program-Memory-Type | FLASH | Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
Connectivity | CAN, I2C, IrDA, LIN, SPI, UART/USART | Voltage-Supply-Vcc-Vdd | 3 V ~ 3.6 V |
Core-Size | 16-Bit | Program-Memory-Size | 256KB (256K x 8) |
Data-Converters | A/D 32x10b/12b | Oscillator-Type | Internal |
Tags | dsPIC33FJ256GP710-I/P, dsPIC33FJ256GP710-I, dsPIC33FJ256GP7, dsPIC33FJ256G, dsPIC33FJ2, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The dsPIC33FJ256GP710-I/PF is a 16-bit microcontroller from Microchip Technology featuring a high performance DSP core with integrated peripherals for advanced control applications. It offers high processing speed, reduced power consumption, and a variety of communication interfaces.
-
Equivalent
Some equivalent products of DSPIC33FJ256GP710-I/PF chip are DSPIC33FJ256GP710-I/PF, DSPIC33FJ128GP710-I/PF, and DSPIC33FJ64GP710-I/PF. These chips are part of the dsPIC33F series from Microchip Technology and offer similar performance and features. -
Features
1. 16-bit microcontroller with up to 40 MIPS performance 2. 256 KB Flash memory, 16 KB RAM 3. Integrated peripherals including ADC, DAC, UART, and PWM 4. USB interface, CAN communication 5. Operating voltage range of 2.5V to 3.6V 6. Operating temperature range of -40°C to 125°C -
Pinout
The DSPIC33FJ256GP710-I/PF has 100 pins and functions as a powerful 16-bit digital signal controller with advanced analog and digital peripherals for a wide range of applications including motor control, power supply management, and sensor processing. -
Manufacturer
The manufacturer of the DSPIC33FJ256GP710-I/PF is Microchip Technology Inc. Microchip Technology is an American company that produces embedded control solutions for a variety of applications in sectors such as automotive, industrial, consumer, and computing. It specializes in the design and manufacture of microcontrollers, microprocessors, and other integrated circuits. -
Application Field
The DSPIC33FJ256GP710-I/PF is commonly used in industrial automation, motor control, power management, and medical devices due to its high-performance digital signal processing capabilities and integrated peripherals for control applications that require precise timing and control accuracy. -
Package
The DSPIC33FJ256GP710-I/PF chip comes in a 64-pin TQFP (Thin Quad Flat Package) form factor with a size of 10mm x 10mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte
So glad I found Ovaga! Their components are top-quality and the service is excellent.