Bestellungen über
$5000ADI LM75BIMMX-3+
Board Mount Temperature Sensors Digital Temperature Sensor and Thermal Watchdog with 2-Wire Interface
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marken: Analog Devices, Inc
Herstellerteil #: LM75BIMMX-3+
Datenblatt: LM75BIMMX-3+ Datenblatt (PDF)
Paket/Gehäuse: SOP-8
Produktart: Temperatursensoren
RoHS-Status:
Lagerzustand: 3.094 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LM75BIMMX-3+ Allgemeine Beschreibung
The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through itsI²C interface to read temperature at any time. The open-drain overtemperature output (OS) sinks current when the programmable temperature limit is exceeded. The OS output operates in either of two modes, comparatoror interrupt. The host controls the temperature at which the alarm is asserted (TOS) and the hysteresis temperature below which the alarm condition is not valid (THYST). Also, the LM75's TOS and THYST registers can be read by the host. The address of the LM75 is set with three pins to allow multiple devices to work on the same bus. Power-up is in comparator mode, with defaults of TOS = +80°C and THYST = +75°C. The 3.0V to 5.5V supply voltage range, low supply current, and I²C interface make the LM75 ideal for many applications in thermal management and protection.
Funktionen
- SO (SOP) and µMAX® (µSOP) Packages
- I²C Bus Interface
- Separate Open-Drain OS Output Operates as Interrupt or Comparator/Thermostat Input
- Register Readback Capability
- Power-Up Defaults Permit Stand-Alone Operation as a Thermostat
- 3.0V to 5.5V Supply Voltage
- Low Operating Supply Current 250µA (typ), 1mA (max)
- 4µA (typ) Shutdown Mode Minimizes Power Consumption
- Up to Eight LM75s Can Be Connected to a Single Bus
- Pin- and/or Register-Compatible with Improved-Performance Maxim Sensors Including MAX7500, MAX6625, MAX6626, DS75LV, and DS7505
Anwendung
- Computers and Office Electronics
- Test Equipment
- Thermal Protection
- Thermal System Management
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer: | Texas Instruments | Product Category: | Board Mount Temperature Sensors |
RoHS: | N | Output Type: | Digital |
Interface Type: | 2-Wire, I2C, SMBus | Minimum Operating Temperature: | - 55 C |
Maximum Operating Temperature: | + 125 C | Mounting Style: | SMD/SMT |
Package / Case: | VSSOP-8 | Packaging: | MouseReel |
Brand: | Texas Instruments | Product: | Temperature Sensors |
Product Type: | Temperature Sensor ICs | Series: | LM75B |
Factory Pack Quantity: | 3500 | Subcategory: | Sensors |
Type: | Temperature Sensor |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
![]() |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
![]() |
Paypal | 4,0 % Servicegebühr wird berechnet. |
![]() |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte