MXIC MX29F040CQI-70G
FLASH - NOR Memory IC 4Mbit Parallel 70 ns 32-PLCC (11.43x14.05)
Marken: MXIC
Herstellerteil #: MX29F040CQI-70G
Datenblatt: MX29F040CQI-70G Datenblatt (PDF)
Paket/Gehäuse: PLCC32
RoHS-Status:
Lagerzustand: 5450 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMMX29F040CQI-70G Allgemeine Beschreibung
FLASH - NOR Memory IC 4Mbit Parallel 70 ns 32-PLCC (11.43x14.05)
Funktionen
- 524,288 x 8 only
- Single power supply operation
- - 5.0V only operation for read, erase and program operation
- Fast access time: 55/70/90ns
- Compatible with MX29F040 device
- Low power consumption
- - 30mA maximum active current(5MHz)
- - 1uA typical standby current
- Command register architecture
- - Byte Programming (9us typical)
- - Sector Erase
- 8 equal sectors of 64K-Byte each
- Auto Erase (chip & sector) and Auto Program
- - Automatically erase any combination of sectors with Erase Suspend capability
- - Automatically program and verify data at specified address
- Erase suspend/Erase Resume
- - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase
- Status Reply
- - Data# Polling & Toggle bit for detection of program and erase cycle completion
- Sector protect/chip unprotect for 5V only system
- Sector protection
- - Hardware method to disable any combination of sectors from program or erase operations
- - Temporary sector unprotect allows code changes in previously locked sectors
- 100,000 minimum erase/program cycles
- 100,000 minimum erase/program cycles
- Latch-up protected to 100mA from -1V to VCC+1V
- Low VCC write inhibit is equal to or less than 3.2V
- Package type:
- - 32-pin PLCC, TSOP or PDIP
- - All Pb-free devices are RoHS Compliant
- Compatibility with JEDEC standard
- - Pinout and software compatible with single-power supply Flash
- 20 years data retention
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
ECCN (US) | EAR99 | Part Status | NRND |
HTS | 8542.32.00.71 | Automotive | No |
PPAP | No | Cell Type | NOR |
Chip Density (bit) | 4M | Architecture | Sectored |
Boot Block | No | Block Organization | Symmetrical |
Address Bus Width (bit) | 19 | Sector Size | 64Kbyte x 8 |
Number of Bits/Word (bit) | 8 | Number of Words | 512K |
Programmability | Yes | Timing Type | Asynchronous |
Max. Access Time (ns) | 70 | Maximum Erase Time (s) | 32/Chip |
Maximum Programming Time (ms) | 13500/Chip | OE Access Time (ns) | 35 |
Interface Type | Parallel | Minimum Operating Supply Voltage (V) | 4.5 |
Typical Operating Supply Voltage (V) | 5 | Maximum Operating Supply Voltage (V) | 5.5 |
Programming Voltage (V) | 4.5 to 5.5 | Operating Current (mA) | 30 |
Minimum Operating Temperature (°C) | -40 | Maximum Operating Temperature (°C) | 85 |
Supplier Temperature Grade | Industrial | Command Compatible | Yes |
ECC Support | No | Support of Page Mode | No |
Minimum Endurance (Cycles) | 100000 | Mounting | Surface Mount |
Package Height | 2.79 | Package Width | 11.43 |
Package Length | 14.05 | PCB changed | 32 |
Standard Package Name | LCC | Supplier Package | PLCC |
Pin Count | 32 |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte