Bestellungen über
$5000Microchip PIC24FJ128GL406-I/MR
16-bit Microcontrollers - MCU 16-Bit, 16 MIPS, 128KB ECC Flash, 32KB RAM, LCD, 60-pin
Marken: Microchip Technology, Inc
Herstellerteil #: PIC24FJ128GL406-I/MR
Datenblatt: PIC24FJ128GL406-I/MR Datasheet (PDF)
Paket/Gehäuse: QFN
Produktart: Microcontrollers
RoHS-Status:
Lagerzustand: 2.912 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
PIC24FJ128GL406-I/MR Allgemeine Beschreibung
ThePIC24FJ ‘GU4/GL4’ family offers up to 512KB of Dual Partition Flash supporting real-timeOver-The-Air (OTA) updates and EEPROM Emulation. Along with a number of coreindependent peripherals (CIPs), it includes a full speed USB and a segmentedLCD controller with animation support. With high memory and sleep current downto a few hundreds of nA while retaining the complete RAM content, this family is perfect for IoT, Industrial,Consumer and Medical applications.
Supportedin the MPLAB® Code Configurator (MCC) tool, the development time getssignificantly reduced by allowing you to configure the devices and librarieswith just a few clicks. To address the evolving focus on safety and security,these MCUs offer hardware safety features and secure protection schemes,simplifying design of smart, safe, secure and connected applications. TheseMCUs feature protection schemes such as Flash OTP by ICSP™ Write Inhibit whichallows the entire Flash to be configured as One-Time-Programmable (OTP) memoryand CodeGuard™ Flash Security which facilitates to segment the memory andimplement access restrictions. These features together with ourCryptoAuthentication™ chips enable you to implement security in yourapplications. Offering an extended operating temperature of up to 125°C withAEC Q100 Grade 1 qualification, this family is also well suited for Automotiveand Industrial applications. A range of hardware safety features on this familyfacilitates your application’s compliance with safety requirements. With ahigh-level of analog integration, this family simplifies sensor interfacing andanalog measurement, while reducing the overall system BoM cost.
Funktionen
- Segmented LCD Controller with Animation
- 64 Segments and 8 Commons supporting up to 480 Pixels
- Core independent autonomous animation: Alternating dual display, blinking and blanking
- LCD Charge Pump for contrast management in battery-powered applications
- External bias option for reducing power consumption
- Operation in power-saving modes
- Core and Operating Conditions
- 2.0V to 3.6V, -40°C to 125°C, AEC Q100 Grade 1 qualified, up to 16 MIPS operation
- Single-cycle instruction execution
- 16 x 16 Hardware Multiply, and 32-bit x 16-bit Hardware Divider
- C compiler optimized instruction set system
- eXtreme Low Power
- Ultra-low-power operation with sleep current down to nA with full RAM retention
- A range of power-saving modes to reduce current consumption, while balancing performance: PMD bits, DOZE, Idle, Sleep and Retention Sleep modes
- A range of Core Independent Peripherals (CIPs) that operate in power saving modes, while off-loading the Central Processing Unit (CPU)
- Secure Protection Features
- Flash ‘One Time Programming’ (OTP) by ICSP™ Write Inhibit that offers an ability to disable Flash erase/write/debug operations
- CodeGuard™ Flash protection to manage memory partitions and access restrictions
- 120-bit Unique Device ID, 256 bytes User OTP and the above protection schemes make an ideal combination of complementary features to implement security together with the CryptoAuthentication™ devices in a secure application
- Hardware Safety Features
- Flash with Error Correction Code (ECC) and Fault Injection for memory integrity check (Single error correction and Double error detection)
- Dead-Man Timer (DMT) clocked by instruction fetches for monitoring the health of software
- Windowed WatchDog Timer (WWDT) for system supervision
- CodeGuard™ Flash protection for memory partition and access restriction
- Fail-Safe Clock Monitor (FSCM) for clock fault management
- Enhanced Programmable Cyclic Redundancy Check (CRC), Programmable High-Low Voltage Detect (HLVD), Brown-out Reset (BOR) and Power-on Reset (POR)
- Class B Safety Library, IEC 60730
- Advanced Integrated Analog
- Up to 24-Channel, 400Ksps, 10/12-Bit Analog-to-Digital Converter (ADC)
- Low-voltage boost for input
- Bandgap reference input feature
- Core Independent windowed threshold compare feature
- Auto-scan feature
- Operation in power-saving modes
- Three Analog Comparators with input multiplexing and programmable reference voltage generators
- 1 Msps 10-bit Digital-to-Analog Converter (DAC) with Buffered Output
- Timer/Counters/Output Compare/Input Capture/Pulse Width Modulation
- Eight MCCP modules, each with a Dedicated 16/32-Bit Timer
- Three 6-output MCCP modules
- Five 2-output MCCP modules
- A total of up to 21x 16-bit timers or 10x 32-bit dedicated timer/counters
- Hardware Real-Time Clock Calendar (RTCC) with Timestamping
- Key Core Independent Peripherals
- 4x Configurable Logic Cells (CLCs)
- 8x Multiple Capture Compare PWMs (MCCPs)
- Segmented LCD controller with Core Independent Animation, up to 480 pixels (8 commons x 64 segments)
- ADC controller with threshold compare and automatic triggers
- Direct Memory Access (DMA) with 6 channels, supporting UART, SPI, ADC, and more
- Communication Interfaces
- 6x UARTs supporting LIN/J2602 and IrDA®
- 4x SPI/I2S, up to 24 MHz operation
- 3x I2C Master and Slave w/Address Masking, PMBus™ and IPMI support
- Clock Management
- On-chip 8 MHz Fast RC (FRC), and 32 kHz Low-Power RC (LPRC) and Secondary (SOSC) oscillators
- Programmable PLL with external oscillator clock sources and Reference Clock Output (REFO)
- Fail-Safe Clock Monitor (FSCM)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) supporting two-speed start-up
- Special Features and Debugger Development Support
- MPLAB Code Configurator (MCC) support
- Peripheral Pin Select (PPS) for flexible pin mapping
- Configurable interrupt-on change on all IOs
- In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via 2-pins
- JTAG Boundary Scan Support
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Category | Integrated Circuits (ICs)EmbeddedMicrocontrollers | Mfr | Microchip Technology |
Series | Automotive, AEC-Q100, PIC® 24F | Package | Tube |
Product Status | Active | Core Processor | PIC |
Core Size | 16-Bit | Speed | 32MHz |
Connectivity | I²C, IrDA, LINbus, SPI, UART/USART | Peripherals | DMA, LCD, PWM, WDT |
Program Memory Size | 128KB (128K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 32K x 8 |
Voltage - Supply (Vcc/Vdd) | 2V ~ 3.6V | Data Converters | A/D 24x10b/12b; D/A 1x10b |
Oscillator Type | External | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Package / Case | 64-VFQFN Exposed Pad |
Supplier Device Package | 64-QFN (9x9) | Base Product Number | PIC24FJ128GL406 |
Manufacturer: | Microchip | Product Category: | 16-bit Microcontrollers - MCU |
RoHS: | Details | Series: | PIC24FJ |
Mounting Style: | SMD/SMT | Package / Case: | QFN-64 |
Core: | PIC24F | Program Memory Size: | 128 kB |
Data Bus Width: | 16 bit | ADC Resolution: | 10 bit, 12 bit |
Maximum Clock Frequency: | 32 MHz | Number of I/Os: | 54 I/O |
Data RAM Size: | 32 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tube |
Brand: | Microchip Technology | DAC Resolution: | 10 bit |
Data RAM Type: | RAM | Interface Type: | I2C, SPI, UART, USB |
Moisture Sensitive: | Yes | Number of ADC Channels: | 16 Channel |
Number of Timers/Counters: | 5 Timer | Processor Series: | PIC24 |
Product: | USB MCU | Product Type: | 16-bit Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 40 |
Subcategory: | Microcontrollers - MCU |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte