Bestellungen über
$5000Infineon SPC560P44L3
32-bit Microcontrollers - MCU SPC560P44L3
Marken: Infineon
Herstellerteil #: SPC560P44L3
Datenblatt: SPC560P44L3 Datenblatt (PDF)
Paket/Gehäuse: QFP100
Produktart: Microcontrollers
RoHS-Status:
Lagerzustand: 6.554 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Funktionen
- Single issue, 32-bit CPU core complex (e200z0h)
- — Compliant with the Power Architecture™ embedded category
- — Enhanced instruction set allowing variable length encoding (VLE) for code size footprint reduction. With the optional encoding of mixed 16-bit and 32-bit instructions, it is possible to achieve significant code size footprint reduction.
- Up to 1.5 Mbytes on-chip Flash supported with the Flash controller
- Up to 96 Kbytes on-chip SRAM
- Memory protection unit (MPU) with 8 region descriptors and 32-byte region granularity on certain family members
- Interrupt controller (INTC) capable of handling 204 selectable-priority interrupt sources
- Frequency modulated phase-locked loop (FMPLL)
- Crossbar switch architecture for concurrent access to peripherals, Flash, or RAM from multiple bus masters
- 16-channel eDMA controller with multiple transfer request sources using DMA multiplexer
- Boot assist module (BAM) supports internal Flash programming via a serial link (CAN or SCI)
- Timer supports I/O channels providing a range of 16-bit input capture, output compare, and pulse width modulation functions (eMIOS)
- 2 analog-to-digital converters (ADC): one 10-bit and one 12-bit
- Cross Trigger Unit to enable synchronization of ADC conversions with a timer event from the eMIOS or PIT
- Up to 6 serial peripheral interface (DSPI) modules
- Up to 10 serial communication interface (LINFlex) modules
- Up to 6 enhanced full CAN (FlexCAN) modules with configurable buffers
- 1 inter-integrated circuit (I2C) interface module
- Up to 149 configurable general purpose pins supporting input and output operations (package dependent)
- Real-Time Counter (RTC)
- — Clock source from internal 128 kHz or 16 MHz oscillator supporting autonomous wakeup with 1 ms resolution with maximum timeout of 2 seconds
- — Optional support for RTC with clock source from external 32 kHz crystal oscillator, supporting wakeup with 1 sec resolution and maximum timeout of 1 hour
- Up to 8 periodic interrupt timers (PIT) with 32-bit counter resolution
- Nexus development interface (NDI) per IEEE-ISTO 5001-2003 Class Two Plus
- Device/board boundary scan testing supported per Joint Test Action Group (JTAG) of IEEE (IEEE 1149.1)
- On-chip voltage regulator (VREG) for regulation of input supply for all internal levels
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer | Infineon |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte