Bestellungen über
$5000
ST STEF033AJR
Hot Swap Voltage Controllers Electronic fuse for 3.3 V line
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marken: STMicroelectronics, Inc
Herstellerteil #: STEF033AJR
Datenblatt: STEF033AJR Datenblatt (PDF)
Paket/Gehäuse: FlipChip-9
RoHS-Status:
Lagerzustand: 3.739 Stück, Neues Original
Produktart: Current Regulation/Management
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
Menge | Einzelpreis | Ext. Preis |
---|---|---|
1 | $0,721 | $0,721 |
200 | $0,280 | $56,000 |
500 | $0,271 | $135,500 |
1000 | $0,264 | $264,000 |
Auf Lager: 3.739 Stck
STEF033AJR Allgemeine Beschreibung
The STEF033 is an integrated electronic fuse optimized for monitoring output current and the input voltage. Connected in series to the 3.3 V rail, it is able to protect the electronic circuitry on its output from overcurrent and overvoltage. The STEF033 has controlled delay and turn-on time. When an overload condition occurs, the device limits the output current to a predefined safe value. If the anomalous overload condition persists, it goes into an open state, disconnecting the load from the power supply. If a continuous short-circuit is present on the board, when the power is re-applied the E-fuse initially limits the output current to a safe value and then goes again into the open state. The voltage clamping circuit prevents the output voltage from exceeding a fixed value, if the input voltage goes beyond this threshold. The device is equipped with a thermal protection circuit. Intervention of thermal protection is signaled to the board-monitoring circuits through an appropriate signal on the Fault pin. Unlike mechanical fuses, which must be physically replaced after a single event, the E-fuse does not degrade in its performances following short-circuit/thermal protection intervention and is reset either by re-cycling the supply voltage or using the appropriate Enable pin. The STEF033 is also available in an auto-retry version; in case of thermal fault it automatically attempts to re-apply power to the load when the die temperature returns to a safe value.
Funktionen
- Continuous current typ.: 3.6 A (DFN), 2.5 A (Flip Chip)
- N-channel on resistance (typ): 40 mΩ (DFN), 25 mΩ (Flip Chip)
- Enable/Fault functions
- Output clamp voltage (typ): 4.5 V
- Undervoltage lockout
- Short-circuit limit
- Overload current limit
- Controlled output voltage ramp
- Thermal latch (typ): 160 °C
- Uses tiny capacitors
- Latching and auto-retry versions
- Operative junction temp. - 40 °C to 125 °C
- Available in DFN10 3x3 and Flip Chip 9 bumps
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | Hot Swap Voltage Controllers |
RoHS: | Y | Product: | Power Distribution |
Current Limit: | 2.5 A | Supply Voltage - Max: | 8 V |
Supply Voltage - Min: | 3.1 V | Number of Channels: | 1 Channel |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
Mounting Style: | SMD/SMT | Package / Case: | FlipChip-9 |
Series: | STEF033 | Brand: | STMicroelectronics |
Input / Supply Voltage - Max: | 8 V | Input / Supply Voltage - Min: | 3.1 V |
Product Type: | Hot Swap Voltage Controllers | Factory Pack Quantity: | 5000 |
Subcategory: | PMIC - Power Management ICs | Tags | STEF03, STEF0, STEF, STE |
ECCN US | EAR99 | ECCN EU | NEC |
Packing Type | Tape And Reel | RoHs compliant | Ecopack2 |
Grade | Industrial |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
![]() |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
![]() |
Paypal | 4,0 % Servicegebühr wird berechnet. |
![]() |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte