Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
ST STM32F102C8T6
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D USB MCU
Marken: STMicroelectronics, Inc
Herstellerteil #: STM32F102C8T6
Datenblatt: STM32F102C8T6 Datasheet (PDF)
Paket/Gehäuse: LQFP-48
RoHS-Status:
Lagerzustand: 3506 Stück, Neues Original
Produktart: Programmierbare Logik-ICs
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
| Menge | Einzelpreis | Ext. Preis |
|---|---|---|
| 1 | $5,771 | $5,771 |
| 10 | $5,047 | $50,470 |
| 30 | $4,604 | $138,120 |
| 100 | $4,235 | $423,500 |
In Stock:3506 PCS
STM32F102C8T6 Allgemeine Beschreibung
The STM32F102xx medium-density USB access line incorporates the high-performance Arm®Cortex®-M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 64 or 128 Kbytes and SRAM of 10 or 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs, two SPIs, one USB and three USARTs), one 12-bit ADC and three general-purpose 16-bit timers.The STM32F102xx family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F102xx medium-density USB access line is delivered in the LQFP48 7 × 7 mm and LQFP64 10 × 10 mm packages.The STM32F102xx medium-density USB access line microcontrollers are suitable for a wide range of applications.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Funktionen
- Core: Arm® 32-bit Cortex®-M3CPU
- 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 10 or 16 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 51 fast I/O ports
- 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to six timers
- Three 16-bit timers, each with up to four IC/OC/PWM or pulse counter
- Two watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to eight communication interfaces
- Up to two I2C interfaces (SMBus/PMBus)
- Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to two SPIs (12 Mbit/s)
- One USB 2.0 full speed interface
- CRC calculation unit, 96-bit unique ID
- ECOPACK packages
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
| RoHS: | Details | Series: | STM32F102C8 |
| Mounting Style: | SMD/SMT | Package / Case: | LQFP-48 |
| Core: | ARM Cortex M3 | Program Memory Size: | 64 kB |
| Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
| Maximum Clock Frequency: | 48 MHz | Number of I/Os: | 37 I/O |
| Data RAM Size: | 10 kB | Supply Voltage - Min: | 2 V |
| Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
| Brand: | STMicroelectronics | Data RAM Type: | SRAM |
| Height: | 1.4 mm | Interface Type: | I2C, SPI, USART, USB |
| Length: | 7 mm | Moisture Sensitive: | Yes |
| Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 3 Timer |
| Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
| Program Memory Type: | Flash | Factory Pack Quantity: | 1500 |
| Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
| Width: | 7 mm |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The STM32F102C8T6 is a microcontroller based on the ARM Cortex-M3 core. It features 64 KB of Flash memory, 8 KB of RAM, and various peripherals like GPIO, timers, UART, SPI, I2C, ADC, and more. It is commonly used in applications requiring low power consumption and real-time control.
-
Equivalent
Some equivalent products of the STM32F102C8T6 chip include STM32F103C8T6, STM32F105C8T6, and STM32F107C8T6. These chips are part of the same STM32F1 series microcontrollers from STMicroelectronics, offering similar features and functionality. -
Features
The STM32F102C8T6 is a microcontroller from STMicroelectronics. It features a 32-bit ARM Cortex-M3 core operating at up to 72 MHz, 64KB flash memory, 8KB RAM, and various peripherals such as UART, SPI, I2C, ADC, and timers. It is suitable for a wide range of applications requiring real-time processing and connectivity. -
Pinout
The STM32F102C8T6 is a microcontroller with a LQFP64 package. It has 64 pins. The function of each pin can vary, depending on the specific configuration and usage of the microcontroller. The pinout and functions can be found in the datasheet provided by the manufacturer. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F102C8T6. It is a multinational semiconductor company that designs, develops, and manufactures a range of electronic components, including microcontrollers like the STM32 series. It provides integrated circuits and solutions for various industries, such as automotive, industrial, consumer electronics, and telecommunications. -
Application Field
The STM32F102C8T6 is widely used in various application areas, including industrial automation, consumer electronics, and medical devices. It is commonly found in products such as motor control systems, set-top boxes, fitness trackers, and blood glucose meters. Its versatility, low power consumption, and rich peripheral options make it suitable for a wide range of applications. -
Package
The STM32F102C8T6 chip comes in a LQFP (Low-Profile Quad Flat Package) package type. It has a form factor of 48 pins and a size of 7 mm x 7 mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
Components arrived in good condition, but shipping time was longer than expected.