Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
ST STM32F105RCT6TR
ARM Microcontrollers - MCU 32-Bit ARM Cortex 256kb Connectivity
Marken: ST
Herstellerteil #: STM32F105RCT6TR
Datenblatt: STM32F105RCT6TR Datasheet (PDF)
Paket/Gehäuse: LQFP64
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 3518 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMSTM32F105RCT6TR Allgemeine Beschreibung
The STM32F105xx and STM32F107xx connectivity line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 256 Kbytes and SRAM 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, four general-purpose 16-bit timers plus a PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, five USARTs, an USB OTG FS and two CANs. Ethernet is available on the STM32F107xx only.The STM32F105xx and STM32F107xx connectivity line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F105xx and STM32F107xx connectivity line family offers devices in three different package types: from 64 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F105xx and STM32F107xx connectivity line microcontroller family suitable for a wide range of applications such as motor drives and application control, medical and handheld equipment, industrial applications, PLCs, inverters, printers, and scanners, alarm systems, video intercom, HVAC and home audio equipment.Figure 1 shows the general block diagram of the device family.ST-LINK/V2 in-circuit debugger/programmer for ST.
Funktionen
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 to 256 Kbytes of Flash memory
- 64 Kbytes of general-purpose SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 3-to-25 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 2 × 12-bit, 1 μs A/D converters (16 channels)
- Conversion range: 0 to 3.6 V
- Sample and hold capability
- Temperature sensor
- up to 2 MSPS in interleaved mode
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 80 fast I/O ports
- 51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- CRC calculation unit, 96-bit unique ID
- Up to 10 timers with pinout remap capability
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 1 × 16-bit motor control PWM timer with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to 14 communication interfaces with pinout remap capability
- Up to 2 × I2C interfaces (
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Supply Voltage Min Volt | 2.0 | Supply Voltage Max Volt | 3.6 |
| Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
| Core | Arm Cortex-M3 | ECCN US | 3A991.a.2 |
| ECCN EU | NEC | Packing Type | Tape And Reel |
| RoHs compliant | Ecopack2 | Grade | Industrial |
| Package Name | LQFP 64 10x10x1.4 mm |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
STM32F105RCT6TR is a microcontroller chip from the STM32 family by STMicroelectronics. It is based on the ARM Cortex-M3 core and offers various features such as multiple communication interfaces, analog-to-digital converters, and a high-speed USB interface. With its rich set of peripherals and low power consumption, the chip is suitable for a wide range of applications in the industrial, consumer electronics, and automotive industries.
-
Equivalent
There are no direct equivalent products for the STM32F105RCT6TR chip. However, some possible alternatives for STM32F105RCT6TR are STM32F207 series, STM32F103RCT6, and STM32F407 series. -
Features
The STM32F105RCT6TR is a microcontroller with the following features: 32-bit ARM Cortex-M3 core, 1 MB Flash memory, 96 KB RAM, 72 MHz maximum frequency, 37 GPIO pins, multiple communication interfaces (USART, SPI, I2C), 12-bit ADC, timers, PWM controllers, and support for various operating voltages. -
Pinout
The STM32F105RCT6TR is a microcontroller with 64 pins. It is a member of the STM32F1 series, offering a 32-bit ARM Cortex-M3 core operating at up to 72 MHz. The pin count refers to the total number of pins available for input and output functions on the device. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F105RCT6TR. It is a global semiconductor company that designs, develops, and manufactures a wide range of electronic and computer components. STMicroelectronics is known for its expertise in microcontrollers, sensors, power management solutions, and other integrated circuits for various industries, including automotive, industrial, and consumer electronics. -
Application Field
The STM32F105RCT6TR can be used in a wide range of applications including industrial control systems, consumer electronics, medical devices, and automotive applications. Its advanced features such as high-performance Cortex-M3 core, large memory capacity, and extensive connectivity options make it suitable for various embedded systems requiring high-speed processing and reliable operation. -
Package
The STM32F105RCT6TR chip is available in a LQFP package type, with a form factor of 64 pins and a size of 10mm x 10mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
We can always count on Ovaga for high-quality components and excellent service. Highly recommend!