Bestellungen über
$5000TI TLC27L2BCP
CMOS Amplifier 2 Circuit 8-PDIP
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marken: Texas Instruments
Herstellerteil #: TLC27L2BCP
Datenblatt: TLC27L2BCP Datenblatt (PDF)
Paket/Gehäuse: 8-PDIP
Produktart: Instrumentation, OP Amps, Buffer Amps
RoHS-Status:
Lagerzustand: 6.313 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TLC27L2BCP Allgemeine Beschreibung
The TLC27L2 and TLC27L7 dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, extremely low power, and high gain.
These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.
The extremely high input impedance, low bias currents, and low power consumption make these cost-effective devices ideal for high gain, low frequency, low power applications. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27L2 (10 mV) to the high-precision TLC27L7 (500 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.
In general, many features associated with bipolar technology are available in LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27L2 and TLC27L7. The devices also exhibit low voltage single-supply operation and ultra-low power consumption, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.
The device inputs and outputs are designed to withstand -100-mA surge currents without sustaining latch-up.
The TLC27L2 and TLC27L7 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.
The C-Suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from -40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of -55°C to 125°C.
Funktionen
- Trimmed Offset Voltage: TLC27L7.500 µV Max at 25°C, VDD = 5 V
- Input Offset Voltage Drift . . . Typically 0.1 µV/Month, Including the First 30 Days
- Wide Range of Supply Voltages Over Specified Temperature Range:>
- 0°C to 70°C.3 V to 16 V
- -40°C to 85°C.4 V to 16 V
- -55°C to 125°C.4 V to 16 V
- Single-Supply Operation
- Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix Types)
- Ultra-Low Power.Typically 95 µW at 25°C, VDD = 5 V
- Output Voltage Range Includes Negative Rail
- High Input Impedance.1012 Typ
- ESD-Protection Circuitry
- Small-Outline Package Option Also Available in Tape and Reel
- Designed-In Latch-Up immunity
LinCMOS is a trademark of Texas Instruments.
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Precision Amplifiers |
RoHS | Details | Series | TLC27L2B |
Number of Channels | 2 Channel | GBP - Gain Bandwidth Product | 110 kHz |
SR - Slew Rate | 30 mV/us | CMRR - Common Mode Rejection Ratio | 94 dB |
Output Current per Channel | 30 mA | Ib - Input Bias Current | 0.6 pA |
Vos - Input Offset Voltage | 204 uV | en - Input Voltage Noise Density | 68 nV/sqrt Hz |
Supply Voltage - Max | 16 V | Supply Voltage - Min | 3 V |
Operating Supply Current | 20 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | Through Hole | Package / Case | PDIP-8 |
Amplifier Type | Precision Amplifier | Brand | Texas Instruments |
Height | 4.57 mm | Input Type | Rail-to-Rail |
Length | 9.81 mm | Operating Supply Voltage | 3 V to 16 V |
Pd - Power Dissipation | 1 W | Product | Precision Amplifiers |
Product Type | Precision Amplifiers | Factory Pack Quantity | 50 |
Subcategory | Amplifier ICs | Supply Type | Single |
Technology | LinCMOS | Tradename | LinCMOS |
Vcm - Common Mode Voltage | Negative Rail - 0.2 V to Positive Rail - 1 V | Voltage Gain dB | 116.9 dB |
Width | 6.35 mm |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
![]() |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
![]() |
Paypal | 4,0 % Servicegebühr wird berechnet. |
![]() |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte