Bestellungen über
$5000TI TLE2061CP
Operational Amplifiers - Op Amps Low Power JFET
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marken: Texas Instruments
Herstellerteil #: TLE2061CP
Datenblatt: TLE2061CP Datenblatt (PDF)
Paket/Gehäuse: 8-PDIP
Produktart: Instrumentation, OP Amps, Buffer Amps
RoHS-Status:
Lagerzustand: 9.030 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TLE2061CP Allgemeine Beschreibung
The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications. The TL206x devices are pin-compatible with other TI BiFETs; they can be used to double the bandwidth of TL06x and TL03x circuits, or to reduce power consumption of TL05x, TL07x, and TL08x circuits by nearly 90%.
BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption. The TLE206x family features a high-output-drive circuit capable of driving 100- loads at supplies as low as ±5 V. This makes them uniquely suited for driving transformer loads in modems and other applications requiring good ac characteristics, low power, and high output drive.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TLE206x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefixes) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements, and output loading. The Texas Instrument TLV2432 and TLV2442 CMOS operational amplifiers are excellent choices to consider.
Funktionen
- 2× Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
- Low Supply Current . 290 µA/Ch Typ
- On-chip Offset Voltage Trimming for Improved DC Performance
- High Output Drive, Specified into 100- Loads
- Lower Noise Floor Than Earlier Generations of Low-Power BiFETs
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 1 Channel |
Supply Voltage - Max | 36 V | GBP - Gain Bandwidth Product | 2 MHz |
Output Current per Channel | 45 mA | SR - Slew Rate | 3.4 V/us |
Vos - Input Offset Voltage | 3.1 mV | Supply Voltage - Min | 7 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 2 nA | Operating Supply Current | 280 uA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 82 dB |
en - Input Voltage Noise Density | 40 nV/sqrt Hz | Series | TLE2061 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.001 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 18 V |
Minimum Dual Supply Voltage | +/- 3.5 V | Operating Supply Voltage | +/- 3.5 V to +/- 18 V |
Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Dual | Technology | BiFET |
Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail - 2 V | Voltage Gain dB | 98.06 dB |
Width | 6.35 mm |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
![]() |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
![]() |
Paypal | 4,0 % Servicegebühr wird berechnet. |
![]() |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte