Bestellungen über
$5000TMC246A-PA
MOTOR DRIVER, FULL BRIDGE, 1.5A QFP-44
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marken: Analog Devices Inc.
Herstellerteil #: TMC246A-PA
Datenblatt: TMC246A-PA Datenblatt (PDF)
Paket/Gehäuse: 44-LQFP
Produktart: Motor Drivers, Controllers
RoHS-Status:
Lagerzustand: 9.458 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TMC246A-PA Allgemeine Beschreibung
One of the standout features of the TMC246A-PA is its adjustable step resolution, allowing users to fine-tune their motor control for optimal performance. Whether you need full step, half step, or microstep resolution, this chip has you covered. Additionally, the built-in stall detection, overtemperature protection, and short circuit detection provide added peace of mind, ensuring safe operation in all conditions
Funktionen
Multiple input formats
24 bit RGB
20 bit CCIR601
10 bit CCIR656
10 bit Digital Composite
Synchronization modes
Master
Slave
Genlock
CCIR656
Subcarrier modes
Free-run
Subcarrier reset
Genlock
DRS-lock
Ancillary Data Control (ANC)
Pixel rates from 10 MHz to 15 MHz
Programmable horizontal timing
Programmable vertical blanking interval (VBI)
Line-by-line pedestal enable
Programmable pedestal height from -20 IRE to 20 IRE
Programmable burst amplitude and phase
Controlled edge rates for
Sync
Burst
Active video
Programmable color space matrix
8:8:8 video reconstruction
Four 10 bit D/As with independent trim
Individual power down modes for each D/A
Multiple output formats
RGB
Y PB PR
Betacam
S-video
Composite
Digital composite output
Pin-driven and data-driven, window keying
Closed Caption waveform generation (13.5 MHz only)
Sin(X)/X compensation filter
5 bit VBI line counter
3 bit field counter
Internal test pattern generation
100% Color Bars
75% Color Bars
Modulated Ramp
Anwendung
Broadcast Television
Nonlinear Video Processing
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer: | Analog Devices Inc. | Product Category: | Motor / Motion / Ignition Controllers & Drivers |
Brand: | ADI Trinamic | Product Type: | Motor / Motion / Ignition Controllers & Drivers |
Subcategory: | PMIC - Power Management ICs |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
![]() |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
![]() |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
![]() |
Paypal | 4,0 % Servicegebühr wird berechnet. |
![]() |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The TMC246A-PA chip is an integrated stepper motor controller and driver. It supports up to two stepper motors and offers advanced features such as stall detection, stealthChop and spreadCycle drive modes, and silent control. With its high resolution, low power consumption, and integrated protection mechanisms, the TMC246A-PA chip is ideal for various applications requiring precise and efficient motor control.
-
Features
The TMC246A-PA is a motor driver module with integrated MOSFETs designed for DC motors. It features a wide voltage supply range of 4.5V to 20V, a maximum continuous motor current of 1.6A, and overcurrent and overtemperature protection. It also provides high efficiency, low standby current, and easy integration into a variety of applications. -
Pinout
The TMC246A-PA has a pin count of 44. Its functions include motor current setting, stall detection, over-temperature protection, and external reference voltage input, among others. -
Manufacturer
The manufacturer of the TMC246A-PA is Trinamic Motion Control GmbH. Trinamic is a semiconductor company specializing in motor and motion control technologies. They develop and produce integrated circuits, modules, and systems that enable precise motion control in a range of applications like robotics, 3D printing, and automation. -
Application Field
The TMC246A-PA is primarily used in applications that require precise and noiseless control of stepper motors, such as robotics, automation systems, 3D printers, and CNC machines. It is ideal for applications where smooth and accurate movement, low power consumption, and high efficiency are key requirements. -
Package
The TMC246A-PA chip is available in a QFN package type, with a square-shaped form and a size of 6mm x 6mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte