Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
TPS92200D1DDCR
LED Lighting Drivers 4-V to 30-V input voltage, 1.5-A output current, synchronous buck LED driver with dimming options 6-SOT-23-THIN -40 to 85
Marken: TEXAS INSTRUMENTS INC
Herstellerteil #: TPS92200D1DDCR
Datenblatt: TPS92200D1DDCR Datenblatt (PDF)
Paket/Gehäuse: SOT-23-6
RoHS-Status:
Lagerzustand: 6319 Stück, Neues Original
Produktart: LED Lighting Drivers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
| Menge | Einzelpreis | Ext. Preis |
|---|---|---|
| 1 | $0,409 | $0,409 |
| 10 | $0,333 | $3,330 |
| 30 | $0,301 | $9,030 |
| 100 | $0,259 | $25,900 |
| 500 | $0,212 | $106,000 |
| 1000 | $0,202 | $202,000 |
In Stock:6319 PCS
TPS92200D1DDCR Allgemeine Beschreibung
The TPS92200 device is a 1.5-A synchronous buck LED driver with 30-V maximum input voltage. By integrating the high-side and low-side NMOS switches, the TPS92200 device provides high power density with high efficiency in an ultra-small solution size. The TPS92200 device uses peak-current-mode control and full internal compensation to provide high transient response performance over a wide range of operating conditions.
The TPS92200 device supports flexible dimming methods. TPS92200D1 implements both PWM and analog dimming modes. In PWM dimming mode, LEDs turn on and off according to PWM duty cycle periodically. The devices analog dimming mode is achieved by changing the internal reference voltage proportional to the voltage level of the analog input in 5% to 100% range. TPS92200D2 implements deeper analog dimming by changing the internal reference voltage proportional to the duty cycle of the PWM signal input in 1% to 100% range.
For safety and protection, the TPS92200 devices implement full protections, including LED open, LED+ short-to-GND, LED short, sense resistor open and short, and device thermal protection.
Funktionen
- 4-V to 30-V wide input range
- Integrated 150-mΩ and 90-mΩ MOSFETs for 1.5-A continuous output current
- Ultra-low shut-down current: 1 µA
- Ultra-low output discharge current from load: 1 µA
- 1-MHz switching frequency
- Maximum duty cycle up to 99%
- Peak current mode with internal compensation
- Flexible dimming options:
- TPS92200D1: PWM dimming with digital input and analog dimming with analog input
- TPS92200D2: analog dimming with digital input
- Ultra-low and accurate FB voltage: 99 mV ±3 mV
- Full protection features:
- LED open-load protection
- LED+ short-to-GND protection with auto-retry
- LED+ and LED– short circuitry protection with auto-retry
- Sense-resistor open-load and short-to-GND protection with auto-retry
- Thermal shutdown protection with auto-retry
- SOT23 (6) package
- VQFN-HR (6) package
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Source Content uid | TPS92200D1DDCR | Pbfree Code | Yes |
| Rohs Code | Yes | Part Life Cycle Code | Active |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | Package Description | SOT-23, 6 PIN |
| Reach Compliance Code | compliant | ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 | Date Of Intro | 2020-06-20 |
| Samacsys Manufacturer | Texas Instruments | Input Characteristics | STANDARD |
| Interface IC Type | LED DISPLAY DRIVER | JESD-30 Code | R-PDSO-G6 |
| JESD-609 Code | e3 | Length | 2.9 mm |
| Moisture Sensitivity Level | 1 | Multiplexed Display Capability | NO |
| Number of Channels | 1 | Number of Functions | 1 |
| Number of Segments | 2 | Number of Terminals | 6 |
| Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
| Output Characteristics | TOTEM-POLE | Package Body Material | PLASTIC/EPOXY |
| Package Code | TSSOP | Package Equivalence Code | TSOP6,.11,37 |
| Package Shape | RECTANGULAR | Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 | Seated Height-Max | 1.1 mm |
| Supply Current-Max | 1 mA | Supply Voltage-Max | 30 V |
| Supply Voltage-Min | 4 V | Supply Voltage-Nom | 12 V |
| Surface Mount | YES | Temperature Grade | INDUSTRIAL |
| Terminal Finish | MATTE TIN | Terminal Form | GULL WING |
| Terminal Pitch | 0.95 mm | Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The TPS92200D1DDCR chip is a highly integrated LED lighting driver/controller designed for offline LED lighting applications. It operates by using a primary-side regulated flyback topology. The chip includes various built-in features such as adjustable output current control, overvoltage protection, thermal shutdown, and a low power standby mode. It provides accurate and efficient LED driving, making it an ideal choice for lighting applications.
-
Equivalent
Some equivalent products of the TPS92200D1DDCR chip are TPS92200D1DCR, TPS92200D1DYR, TPS92210DRCR, TPS92210DRCR, and TPS92210DRHY. -
Features
The features of TPS92200D1DDCR include a synchronous buck controller design, wide input voltage range, frequency synchronization and programmability, adjustable output voltage, integrated gate drivers, and various protection features like overcurrent, overvoltage, and overtemperature protection. -
Pinout
The TPS92200D1DDCR is a 6-pin integrated circuit. It is a primary side sensing controller for isolated flyback converters. The pin count and function of this device are as follows: Pin 1 (VCC) is the supply voltage input, Pin 2 (FB) is the feedback input, Pin 3 (RT/UVLO) is the timing resistor and under-voltage lockout input, Pin 4 (VSENSE) is the current sense input, Pin 5 (GND) is the ground, and Pin 6 (CS) is the current sense output. -
Manufacturer
Texas Instruments is the manufacturer of the TPS92200D1DDCR. It is an American technology company that specializes in semiconductors and integrated circuits. -
Application Field
The TPS92200D1DDCR is a highly integrated synchronous buck LED driver designed for general lighting applications. It can be used in various application areas such as residential lighting, commercial lighting, industrial lighting, and outdoor lighting. -
Package
The TPS92200D1DDCR chip comes in a DSBGA package type, has a DD form (Dual Flat, No Leads) with a size of 2 mm x 2 mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
