Microchip USB3250-ABZJ
PHY 1-CH 12Mbps/480Mbps 1.8V/3.3V 56-Pin QFN Tray
Marken: Microchip Technology, Inc
Herstellerteil #: USB3250-ABZJ
Datenblatt: USB3250-ABZJ Datasheet (PDF)
Paket/Gehäuse: VQFN-56
Produktart: Schnittstellen-ICs
RoHS-Status:
Lagerzustand: 2438 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMUSB3250-ABZJ Allgemeine Beschreibung
The USB3250 provides the Physical Layer (PHY) interface to a USB 2.0 Device Controller. The IC is available in a 56 pin QFN.
The USB3250 is a USB 2.0 physical layer transceiver (PHY) integrated circuit. Microchip's proprietary technology results in low power dissipation, which is ideal for building a bus powered USB 2.0 peripheral. The PHY can be configured for either an 8-bit unidirectional or a 16-bit bidirectional parallel interface, which complies with the USB Transceiver Macrocell Interface (UTMI) specification. It supports 480Mbps transfer rate, while remaining backward compatible with USB 1.1 legacy protocol at 12Mbps.
All required termination for the USB 2.0 Transceiver is internal. Internal 5.25V short circuit protection of DP and DM lines is provided for USB compliance.
While transmitting data, the PHY serializes data and generates SYNC and EOP fields. It also performs needed bit stuffing and NRZI encoding. Likewise, while receiving data, the PHY de-serializes incoming data, stripping SYNC and EOP fields and performs bit un-stuffing and NRZI decoding.
*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Funktionen
- USB-IF "Hi-Speed" Certified to USB 2.0 Electrical Specification
- Interface Compliant with the UTMI Specification (60MHz 8-bit Unidirectional Interface and 30MHz 16-bit Bidirectional Interface)
- Supports 480Mbps High Speed (HS) and 12Mbps Full Speed (FS) Serial Data Transmission Rates
- Integrated 45 Ohm and 1.5k Ohm Termination Resistors Reduce External Component Count
- Internal Short Circuit Protection of DP and DM Lines
- On-Chip Oscillator Operates with Low Cost 12MHz Crystal
- Robust and Low Power Digital Clock and Data Recovery Circuit
- SYNC and EOP Generation on Transmit Packets and Detection on Receive Packets
- NRZI Encoding and Decoding
- Bit Stuffing and Unstuffing with Error Detection
- Supports the USB Suspend State, HS Detection, HS Chirp, Reset and Resume
- Support for All Test Modes Defined in the USB 2.0 Specification
- Draws 72mA (185mW) Maximum Current Consumption in HS Mode - Ideal for Bus Powered Functions
- On-Die Decoupling Capacitance and Isolation for Immunity to Digital Switching Noise
- Available in a 56-Pin QFN Package
- Full Industrial Operating Temperature Range from -40°C to +85°C (Ambient)
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Upstream Port | UTMI | Reference Clock Freq | 12MHz |
IO Voltage | 3.3V | ULPI Input Clock Mode | No |
Crystal Support | Yes | Battery Charger Detection | No |
Integrated USB Switch | No | OTG | No |
Host Based I/F | No | Temp Range Min | -40 |
Temp Range Max | 85 | feature-process-technology | |
feature-packaging | Tray | feature-rad-hard | |
feature-pin-count | 56 | feature-supplier-package | QFN |
feature-standard-package-name1 | QFN | feature-cecc-qualified | No |
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | No |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The USB3250-ABZJ chip is a USB controller chip used for USB 2.0 applications. It supports high-speed data transfer rates of up to 480 Mbps and is designed to be used in embedded systems, consumer electronics, and industrial applications. It provides low power consumption and integrates various features like USB host and device functionality, as well as USB battery charging.
-
Features
The USB3250-ABZJ is a USB controller that features a high-speed USB 2.0 interface, supporting various USB profiles and device classes. It supports both full-speed and low-speed USB devices, offers flexible power management options, and includes a versatile firmware suite for easy customization. -
Pinout
The USB3250-ABZJ is a USB controller. It has a 32-pin count and is primarily used for connecting and controlling USB devices, such as mice and keyboards, with a host computer. -
Manufacturer
The manufacturer of the USB3250-ABZJ is Microchip Technology Inc. It is a semiconductor company that designs and manufactures microcontroller, mixed-signal, analog, and flash-IP integrated circuits. -
Application Field
The USB3250-ABZJ is commonly used in applications that require a USB-to-UART bridge or USB connectivity. It is also suitable for applications that require USB data transfer rates of up to 12 Mbps. It can be used in various industries, including consumer electronics, embedded systems, and industrial automation. -
Package
The USB3250-ABZJ chip has a 32-LFCSP (5x5) package type, which refers to a 32-lead lead frame chip scale package with a size of 5x5mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte