Bestellungen über
$5000ZL30255LFF7
SONET/SDH IC 1.035GHz 2 Output 64-LGA (10x5)
Marken: Microchip Technology
Herstellerteil #: ZL30255LFF7
Datenblatt: ZL30255LFF7 Datenblatt (PDF)
Paket/Gehäuse: 64-VFLGAExposedPad
Produktart: Application Specific Clock/Timing
RoHS-Status:
Lagerzustand: 9.090 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
ZL30255LFF7 Allgemeine Beschreibung
The ZL30255 is a flexible, high-performance, clock multiplier/jitter attenuator IC. From any input clock frequency 1kHz to 1250MHz this device can produce frequency-locked output frequencies from <1Hz to 1035MHz and as many as 6 differential or 12 CMOS output clock signals. Output jitter is typically 0.16 to 0.28ps RMS (12kHz to 20MHz). Automatic self-configuration from internal EEPROM allows clock signals to be available immediately after power-up or reset.
Funktionen
- Two Independent Channels
- Two Differential/CMOS inputs
- One single-ended/CMOS input
- Any input frequency from 1kHz to 1250MHz (1kHz to 300MHz for CMOS)
- Inputs continually monitored for activity and frequency accuracy
- Automatic or manual reference switching
- Programmable bandwidth, 14Hz to 500Hz
- Attenuates jitter up to several UI
- Freerun or digital hold on loss of all inputs
- Digitally controlled phase adjust
- Any Output Frequency from <1Hz to 1035MHz
- High-resolution fractional frequency conversion with 0ppm error
- Easy-to-configure, encapsulated design requires no external VCXO or loop filter components
- Each output has independent dividers
- Output Jitter Typically 0.16 to 0.28ps RMS (12kHz to 20MHz integration band)
- Outputs are CML or 2xCMOS, can interface to LVDS, LVPECL, HSTL, SSTL and HCSL
- In 2xCMOS mode, the P and N pins can be different frequencies (e.g. 125MHz and 25MHz)
- Per-output supply pin with CMOS output voltages from 1.5V to 3.3V
- Precise output alignment circuitry and per-output phase adjustment
- Per-output enable/disable and glitchless start/stop (stop high or low)
- Automatic self-configuration at power-up from internal EEPROM; up to four configurations per channel, pin-selectable
- Numerically controlled oscillator mode
- Spread-spectrum modulation mode
- SPI or I2C processor Interface
- Tiny 5x10mm LGA package
- Easy-to-use evaluation software
- Each channel of the ZL30255 can be ordered with up to four user-defined, factory-programmed device configurations
- Three Input Clocks Per Channel
- Low-Bandwidth DPLL Per Channel
- Low-Jitter Fractional-N APLL and 3 Outputs per Channel
- General Features
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Mfr | Microchip Technology | Series | - |
Package | Tape & Reel (TR) | Product Status | Active |
Programmabe | Not Verified | PLL | Yes |
Main Purpose | SONET/SDH | Input | CMOS, Crystal |
Output | CML, CMOS | Number of Circuits | 2 |
Ratio - Input:Output | 4:3 | Differential - Input:Output | Yes/Yes |
Frequency - Max | 1.035GHz | Voltage - Supply | - |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Package / Case | 64-VFLGA Exposed Pad | Supplier Device Package | 64-LGA (10x5) |
Base Product Number | ZL30255 |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte