Bestellungen über
$5000TI CD4066BPWR
4 Circuit IC Switch 1:1 240Ohm 14-TSSOP
Marken: TI
Herstellerteil #: CD4066BPWR
Datenblatt: CD4066BPWR Datenblatt (PDF)
Paket/Gehäuse: TSSOP (PW)-14
RoHS-Status:
Lagerzustand: 9.372 Stück, Neues Original
Produktart: Analog Switches, Multiplexers, Demultiplexers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
Menge | Einzelpreis | Ext. Preis |
---|---|---|
5 | $0,286 | $1,430 |
50 | $0,233 | $11,650 |
150 | $0,210 | $31,500 |
500 | $0,182 | $91,000 |
2000 | $0,141 | $282,000 |
4000 | $0,133 | $532,000 |
Auf Lager: 9.372 Stck
CD4066BPWR Allgemeine Beschreibung
The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device, but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full signal-input range.
The CD4066B device consists of four bilateral switches, each with independent controls. Both the p and the n devices in a given switch are biased on or off simultaneously by the control signal. As shown in Figure 17, the well of the n-channel device on each switch is tied to either the input (when the switch is on) or to VSS (when the switch is off). This configuration eliminates the variation of the switch-transistor threshold voltage with input signal and, thus, keeps the on-state resistance low over the full operating-signal range.
The advantages over single-channel switches include peak input-signal voltage swings equal to the full supply voltage and more constant on-state impedance over the input-signal range. However, for sample-and-hold applications, the CD4016B device is recommended.
Funktionen
- 15-V Digital or ±7.5-V Peak-to-Peak Switching
- 125-Ω Typical On-State Resistance for
15-V Operation - Switch On-State Resistance Matched to Within
5 Ω Over 15-V Signal-Input Range - On-State Resistance Flat Over Full
Peak-to-Peak Signal Range - High On or Off Output-Voltage Ratio:
80 dB Typical at fis = 10 kHz, RL = 1 kΩ - High Degree of Linearity: <0.5% Distortion Typical at fis = 1 kHz, Vis = 5-Vp-p
VDD – VSS ≥ 10-V, RL = 10 kΩ - Extremely Low Off-State Switch Leakage, Resulting in Very Low Offset Current and High Effective Off-State Resistance: 10 pA Typical at VDD – VSS = 10-V, TA = 25°C
- Extremely High Control Input Impedance
(Control Circuit Isolated From Signal Circuit):
1012 Ω Typical - Low Crosstalk Between Switches: –50 dB Typical at fis = 8 MHz, RL = 1 kΩ
- Matched Control-Input to Signal-Output Capacitance: Reduces Output Signal Transients
- Frequency Response,
Switch On = 40 MHz Typical - 100% Tested for Quiescent Current at 20-V
- 5-V, 10-V, and 15-V Parametric Ratings
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Configuration | 1:1 SPST | Number of channels | 4 |
Power supply voltage - single (V) | 3.3, 5, 12, 16, 20 | Power supply voltage - dual (V) | +/-10, +/-2.5, +/-5 |
Protocols | Analog | Ron (typ) (Ω) | 125 |
CON (typ) (pF) | 8 | Supply current (typ) (µA) | 0.01 |
Bandwidth (MHz) | 40 | Operating temperature range (°C) | -55 to 125 |
Input/output continuous current (max) (mA) | 10 | Rating | Catalog |
Drain supply voltage (max) (V) | 18 | Supply voltage (max) (V) | 18 |
Negative rail supply voltage (max) (V) | 0 |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The CD4066BPWR is a Quad Bilateral Switch, also known as a CMOS analog switch. It consists of four switches that can be used for multiplexing and signal routing in electronic circuits. It operates at low power consumption and has high input impedance. The chip can be used in various applications such as audio routing, signal switching, and analog signal processing.
-
Equivalent
Equivalent products of CD4066BPWR chip are TC4066BP, HCF4066BE, MC14066BDG, HEF4066BT, 74HC4066N, and DG4066DJ. -
Features
CD4066BPWR is a quad bilateral switch with four independent channels. It operates from a wide range of power supply voltages and offers low power consumption. It has low on-resistance and low off-leakage current, making it ideal for use in analog signal switching applications. -
Pinout
CD4066BPWR is a quad bilateral switch with a pin count of 14. It is used for analog switching, signal processing, and control applications. It includes four independent switches with control inputs and an open drain output. -
Manufacturer
The manufacturer of CD4066BPWR is Texas Instruments. Texas Instruments is an American technology company that specializes in designing and manufacturing semiconductors and integrated circuits for a variety of industries including automotive, industrial, and consumer electronics. -
Application Field
CD4066BPWR is a quad bilateral switch used in a variety of applications including audio and video signal switching, analog multiplexing/demultiplexing, waveform generation, and digital logic interfacing. It can be found in audio mixers, data acquisition systems, test equipment, and signal routing applications. -
Package
The CD4066BPWR chip is a Quad Bilateral Switch. It comes in a surface mount package type referred to as TSSOP. The dimensions of the package are 4.4mm x 4.9mm with a thickness of 1.1mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte