Microchip IS2020S-203-TRAY

IS2020S-203-TRAY Allgemeine Beschreibung

The IS2020 Stereo Audio Chip is a compact, highly integrated, CMOS single-chip RF and baseband IC for Bluetooth 5.0 with Enhanced Data Rate 2.4GHz applications. This chip is fully compliant with Bluetooth specification and completely backward-compatible with Bluetooth 3.0, 2.0 or 1.2 systems. It incorporates Bluetooth 1M/2M/3Mbps RF, single-cycle 8bit MCU, TX/RX modem, 5-port memory controller, task/hopping controller, UART interface, and Microchip’s own Bluetooth software stack to achieve the required BT 5.0 with EDR functions.

To provide the superior audio and voice quality, it also integrates a DSP co-processor, a PLL, and a CODEC dedicated for voice and audio applications. For voice, not only basic CVSD encoding and decoding but also enhanced noise reduction and echo cancellation are implemented by the built-in DSP to achieve better quality in both sending and receiving sides. For the enhanced audio applications, SBC/AAC_LC decoding functions can be also carried out by DSP to satisfy Bluetooth A2DP requirements.

In addition, to minimize the external components required for portable devices, a battery voltage sensor, battery charger, a switching regulator and LDO are integrated to reduce system BOM cost for various Bluetooth applications.

Consider designing with the latest Bluetooth Audio device, IS2083.

Funktionen

• Bluetooth 5 certified
• HFP 1.6
• HSP 1.1
• A2DP 1.2
• AVRCP 1.5
• SPP 1.0
• PBAP 1.0
• 16MHz main clock input
• Built-in internal ROM for program memory
• Support to connect to two hosts ( phones, tablets…) with HFP or A2DP profiles simultaneously
• Adaptive Frequency Hopping (AFH) avoids occupied RF channels
• Fast Connection supported RF Hardware
• Combined TX/RX RF terminal simplifies external matching and reduces external antenna switches
• Max. +4dBm output power with 20 dB level control from register control
• Built-in T/R switch for Class 2/3 application
• To avoid temperature variation, temperature sensor with temperature calibration is utilized into bias current and gain control
• Fully integrated synthesizer has been created. There requires no external VCO, varactor diode, resonator and loop filter
• Crystal oscillation with built-in digital trimming for temperature/process variations
• Supports 64 kb/s A-Law or µ-Law PCM format, or CVSD (Continuous Variable Slope Delta Modulation) for SCO channel operation
• Noise suppression
• Echo suppression
• SBC and optional AAC decoding
• Packet loss concealment
• Build-in four languages (Chinese/ English/ Spanish/ French) voice prompts and 20 events for each one (This function can be set up in UI tool.)
• 20 bit DAC and 16 bit ADC codec
• 98dB SNR DAC playback
• Built-in Lithium-ion battery charger (up to 350mA)
• Integrate 3V, 1.8V configurable switching regulator and LDO
• Built-in ADC for battery monitor and voltage sense
• A line-in port for external audio input
• Two LED drivers
• High speed HCI-UART (Universal Asynchronous Receiver Transmitter) interface (up to 921600bps) Package
• 7 x 7 mm2 56QFN package

Spezifikationen