MXIC MX29LV160TMC-90

MX29LV160TMC-90 Allgemeine Beschreibung

GENERAL DESCRIPTION The MX29LV160T/B & MX29LV160AT/AB is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160T/B & MX29LV160AT/AB is packaged in 44-pin SOP, 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.FEATURES • Extended single - supply voltage range 2.7V to 3.6V • 2,097,152 x 8/1,048,576 x 16 switchable • Single power supply operation - 3.0V only operation for read, erase and program operation • Fast access time: 70/90ns • Low power consumption - 30mA maximum active current - 0.2uA typical standby current • Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address • Erase Suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase. • Status Reply - Data polling & Toggle bit for detection of program and erase operation completion. • Ready/Busy pin (RY/BY) - Provides a hardware method of detecting program or erase operation completion. • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors. • CFI (Common Flash Interface) compliant (for MX29LV160AT/AB) - Flash device parameters stored on the device and provide the host system to access • 100,000 minimum erase/program cycles • Latch-up protected to 100mA from -1V to VCC+1V • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Low VCC write inhibit is equal to or less than 1.4V • Package type: - 44-pin SOP - 48-pin TSOP - 48-ball CSP (8x13mm:for MX29LV160T/B; 6x8mm: for MX29LV160AT/AB) • Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash

Funktionen

• 1. It is a 16-megabit (2 megabyte) flash memory with a 90 nanosecond program/erase time.
• 2. The device operates on a single 3.0V to 3.6V power supply.
• 3. It offers fast read access time of 70 nanoseconds.
• 4. MX29LV160TMC-90 has a low power consumption during standby or operation.
• 5. It provides a sector erase architecture, allowing for easy memory organization.
• 6. It supports a variety of control pin functionalities for effective data programming and reading.

Anwendung

• 1. The MX29LV160TMC-90 is commonly used in computer systems, laptops, and servers for storing system firmware or the BIOS (Basic Input/Output System).
• 2. It can also be utilized in various consumer electronics devices like digital cameras, mobile phones, and portable media players.
• 3. Embedded systems often employ this flash memory for program storage or firmware updates.
• 4. It is suitable for any application requiring non-volatile memory that can be electronically erased and reprogrammed.

Spezifikationen