Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
ON NCV7356D1R2G
1/1 Transceiver Half CANbus 8-SOIC
Marken: ON Semiconductor, LLC
Herstellerteil #: NCV7356D1R2G
Datenblatt: NCV7356D1R2G Datasheet (PDF)
Paket/Gehäuse: SOIC-8
RoHS-Status:
Lagerzustand: 2239 Stück, Neues Original
Produktart: Schnittstellen-ICs
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
| Menge | Einzelpreis | Ext. Preis |
|---|---|---|
| 1 | $1,528 | $1,528 |
| 10 | $1,306 | $13,060 |
| 30 | $1,183 | $35,490 |
| 100 | $0,892 | $89,200 |
| 500 | $0,830 | $415,000 |
| 1000 | $0,804 | $804,000 |
In Stock:2239 PCS
NCV7356D1R2G Allgemeine Beschreibung
The NCV7356 is a physical layer device for a single wire data link capable of operating with various Carrier Sense Multiple Access with Collision Resolution (CSMA/CR) protocols such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices which use the network. The network shall be able to operate in either the normal data rate mode or a high−speed data download mode for assembly line and service data transfer operations. The high−speed mode is only intended to be operational when the bus is attached to an off−board service node. This node shall provide temporary bus electrical loads which facilitate higher speed operation. Such temporary loads should be removed when not performing download operations. The bit rate for normal communications is typically 33 kbit/s, for high−speed transmissions like described above a typical bit rate of 83 kbit/s is recommended. The NCV7356 is designed in accordance to the Single Wire CAN Physical Layer Specification GMW3089 V2.3 and supports many additional features like undervoltage lockout, timeout for faulty blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current.
Funktionen
- Fully Compatble with J2411 Single Wire CAN Specification
- 60 uA max sleep current
- 100 kbps high speed mode capable
- Operating voltage range 5.0 to 27 V
- 40 kbps bus speed
- Selective BUS wake up
- 3.3 V and 5 V compatible logic inputs
- Inhibit pin to control external voltage regulators
- Standby to sleep mode timeout
- Fully integrated receiver filter
- Loss of ground protection
- Bus donminant timeout
- Undervoltage lockout
- Bus terminals proof against short circuits and transients
Anwendung
- In-Vehicle Networking
- Industrial Networking
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Source Content uid | NCV7356D1R2G | Pbfree Code | Yes |
| Part Life Cycle Code | Active | Ihs Manufacturer | ONSEMI |
| Part Package Code | SOIC-8 Narrow Body | Package Description | SOIC-8 |
| Pin Count | 8 | Manufacturer Package Code | 751-07 |
| Reach Compliance Code | compliant | HTS Code | 8542.39.00.01 |
| Factory Lead Time | 55 Weeks | Samacsys Manufacturer | onsemi |
| JESD-30 Code | R-PDSO-G8 | Moisture Sensitivity Level | 3 |
| Number of Functions | 1 | Number of Terminals | 8 |
| Number of Transceivers | 1 | Package Body Material | PLASTIC/EPOXY |
| Package Code | SOP | Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR | Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 | Surface Mount | YES |
| Telecom IC Type | CAN TRANSCEIVER | Temperature Grade | AUTOMOTIVE |
| Terminal Finish | MATTE TIN | Terminal Form | GULL WING |
| Terminal Position | DUAL | Time@Peak Reflow Temperature-Max (s) | 30 |
| feature-packaging | Tape and Reel | feature-pin-count | 8 |
| feature-supplier-package | SOIC N | feature-standard-package-name1 | SO |
| feature-cecc-qualified | No | feature-esd-protection | |
| feature-military | No | feature-aec-qualified | Yes |
| feature-aec-qualified-number | AEC-Q100 | feature-auto-motive | Yes |
| feature-p-pap | Yes | feature-eccn-code | EAR99 |
| feature-svhc | No |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Äquivalente Teile
Für den NCV7356D1R2G Komponente, Sie könnten diese Ersatz- und Alternativteile in Betracht ziehen:
Artikelnummer
Marken
Paket
Beschreibung
Artikelnummer : NCV7356D2G
Marken :
Paket :
Beschreibung :
Artikelnummer : NCV7356D1G
Marken :
Paket :
Beschreibung :
Teilpunkte
-
The NCV7356D1R2G chip is a multi-purpose quad channel low-side and high-side driver designed for automotive applications. It is capable of driving various loads, including incandescent bulbs, LEDs, solenoids, and motors. The chip incorporates various protection features, such as over-temperature, over-voltage, and short-circuit protection, making it suitable for demanding automotive environments while ensuring safe operation.
-
Features
The NCV7356D1R2G is a power management integrated circuit (PMIC) designed for automotive applications. It features six high-side smart switches and six low-side drivers, along with diagnostic and protection features like overtemperature, overcurrent, and undervoltage lockout. The PMIC also supports SPI communication interface and provides robust ESD protection. -
Pinout
NCV7356D1R2G is a power management IC with 32 pins. Functions include regulating and providing power to various automotive systems. It features a CAN transceiver for communication between modules, as well as power supply control for high-speed differential and 12V applications. -
Manufacturer
The manufacturer of the NCV7356D1R2G is ON Semiconductor. ON Semiconductor is a global company that designs and produces semiconductor components for various applications, including automotive, consumer electronics, and industrial sectors. -
Application Field
The NCV7356D1R2G is a quad channel low-side driver with integrated diagnostics and protection features. It is commonly used in automotive applications such as active suspension systems, power steering control, and fuel injector control, where precise and reliable control of high-current loads is required. -
Package
The NCV7356D1R2G chip is available in a package type known as SOIC-16. It has a standard form factor with 16 pins and a size of 10.3mm x 7.5mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
Not the best quality components, but satisfactory for lower-budget projects.