Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
ADI OP27GZ
Operational Amplifier, Precision, 1 Amplifier, 8 MHz, 2.8 V/µs, ± 4V to ± 22V, DIP, 8 Pins
Marken: Analog Devices, Inc
Herstellerteil #: OP27GZ
Datenblatt: OP27GZ Datasheet (PDF)
Paket/Gehäuse: CDIP-8
Produktart: Verstärker-ICs
RoHS-Status:
Lagerzustand: 1000 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMOP27GZ Allgemeine Beschreibung
The OP279 is a dual rail-to-rail, high output current, single supply amplifier.It is designed for low voltage applications that require either current or capacitive load drive capability.The OP279 can sink and source currents of ±80 mA (typ) and is stable with capacitive loads to 10 nF.
Applications with the benefit from the OP279's high output current include driving headphones, displays, transformers, and power transistors. The powerful output is combined with a unique input stage that maintains very low distortion with wide common-mode range, even in single supply designs.
The OP279 can be used as a buffer to provide much greater drive capability than can usually be provided by CMOS outputs.CMOS ASICs and DACs often have outputs that can swing to both the positive supply and ground, but are incapable of driving greater than a few milliamps.
Bandwith is typically 5 MHz and the slew rate is 3 V/µs, making these amplifiers well suited for single supply applications that require audio bandwidths when used in high gain configurations.Operation is guaranteed from voltages as low as 4.5 V, up to 12 V.
When using the OP279 in +5 volt systems, very good audio performance can be attained.THD is below 0.01% with a 600 Ohm load, and noise is a respectable 21 nV/Hz.Supply current is less than 3.5 mA per amplifier.
The OP279 is available in 8-pin plastic DIP and SO-8 surface mount packages.They are specified over the industrial (-40°C to +80°C) temperature range.
Funktionen
- Rail-to-Rail Inputs and Outputs
- High Output Current: ±60 mA
- Single Supply: 5 V to 12 V
- Wide Bandwidth: 5 MHz
- High Slew Rate: 3 V/±s
- Low Distortion: 0.01%
- Unity-Gain Stable
- No Phase Reversal
- Short-Circuit Protected
- Drives Capacitive Loads: 10 nF
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| feature-type | Low Noise Amplifier | feature-manufacturer-type | Low Noise Amplifier |
| feature-number-of-channels-per-chip | 1 | feature-rail-to-rail | |
| feature-process-technology | feature-output-type | ||
| feature-maximum-input-offset-voltage-mv | 0.1@±15V | feature-maximum-supply-current-ma | |
| feature-maximum-input-offset-current-ua | 0.075@±15V | feature-maximum-input-bias-current-ua | 0.08@±15V |
| feature-maximum-power-dissipation-mw | feature-typical-slew-rate-v-us | 2.8@±15V | |
| feature-typical-gain-bandwidth-product-mhz | 8 | feature-shut-down-support | No |
| feature-packaging | Tube | feature-rad-hard | |
| feature-pin-count | 8 | feature-supplier-package | CDIP |
| feature-standard-package-name1 | DIP | feature-cecc-qualified | No |
| feature-esd-protection | Yes | feature-escc-qualified | |
| feature-military | No | feature-aec-qualified | No |
| feature-aec-qualified-number | feature-auto-motive | No | |
| feature-p-pap | No | feature-eccn-code | EAR99 |
| feature-svhc | Yes |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The OP27GZ is a precision operational amplifier (op-amp) integrated circuit that offers low offset voltage, low noise, and high open-loop gain. It is commonly used in precision instrumentation and sensor applications where accuracy and stability are critical. The OP27GZ is known for its high performance and reliability in demanding analog circuit designs.
-
Equivalent
Some equivalent products of the OP27GZ chip are AD8676, OPA277, LT1012, and AD797. These are all precision operational amplifiers with similar specifications and performance characteristics. -
Features
1. Low offset voltage: 25 µV max 2. Low input bias current: 0.2 nA max 3. Low noise: 9 nV/√Hz at 1 kHz 4. Wide supply voltage range: ±2 V to ±18 V 5. High open-loop gain: 120 dB 6. Low distortion: 0.0006% at 1 kHz -
Pinout
The OP27GZ is a 8-pin dual operational amplifier with the following functions: Pin 1: Output A Pin 2: Inverting input A Pin 3: Non-inverting input A Pin 4: V- Pin 5: V+ Pin 6: Non-inverting input B Pin 7: Inverting input B Pin 8: Output B -
Manufacturer
The manufacturer of the OP27GZ is Analog Devices. Analog Devices is an American multinational semiconductor company specializing in data conversion and signal processing technology. They design and manufacture a wide range of analog integrated circuits for various applications in industries such as automotive, communications, healthcare, and industrial. -
Application Field
The OP27GZ is typically used in precision instrumentation applications such as data acquisition systems, medical equipment, and scientific instruments due to its low offset voltage, low noise, and high gain bandwidth. It is also suitable for use in control systems, test equipment, and audio systems where high precision and stability are required. -
Package
The OP27GZ chip is in a 8-SOIC (Small Outline Integrated Circuit) package, with a surface mount form. It has a size of 4.90mm x 3.91mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
Ovaga's products have been reliable and have never let us down. Highly recommended!