TI SN65HVD1781QDRQ1
1/1 Transceiver Half RS422, RS485 8-SOIC
Marken: TI
Herstellerteil #: SN65HVD1781QDRQ1
Datenblatt: SN65HVD1781QDRQ1 Datenblatt (PDF)
Paket/Gehäuse: SOIC-8
RoHS-Status:
Lagerzustand: 6884 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
Menge | Einzelpreis | Ext. Preis |
---|---|---|
1 | $2,919 | $2,919 |
10 | $2,722 | $27,220 |
30 | $2,604 | $78,120 |
100 | $2,488 | $248,800 |
500 | $2,431 | $1215,500 |
1000 | $2,408 | $2408,000 |
In Stock:6884 PCS
SN65HVD1781QDRQ1 Allgemeine Beschreibung
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to the human-body-model specification.
These devices combine a differential driver and a differential receiver, which operate from a single power supply. In the HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common-mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from –40°C to 125°C. These devices are pin-compatible with the industry-standard SN75176 transceiver, making them drop-in upgrades in most systems.
These devices are fully compliant with ANSI TIA/EIA 485-A with a 5-V supply and can operate with a 3.3-V supply with reduced driver output voltage for low-power applications. For applications where operation is required over an extended common-mode voltage range, see the SN65HVD1785 (SLLS872) data sheet.
Funktionen
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results
- Device Temperature Grade 1:
–40°C to 125°C Ambient Operating Temperature Range - Device HBM ESD Classification Level H2
- Device CDM ESG Classification Level C3B
- Device Temperature Grade 1:
- Bus-Pin Fault Protection to:
- > ±70 V (’HVD1780-Q1, ’HVD1781-Q1)
- > ±30 V (’HVD1782-Q1)
- Operation With 3.3-V to 5-V Supply Range
- ±16-kV HBM Protection on Bus Pins
- Reduced Unit Load for up to 320 Nodes
- Failsafe Receiver for Open-Circuit, Short-Circuit and Idle-Bus Conditions
- Low Power Consumption
- Low Standby Supply Current, 1 µA Maximum
- ICC 4-mA Quiescent During Operation
- Pin-Compatible With Industry-Standard SN75176
- Signaling Rates of 115 kbps, 1 Mbps, and up to 10 Mbps
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Number of receivers | 1 | Number of transmitters | 1 |
Duplex | Half | Supply voltage (nom) (V) | 3.3, 5 |
Signaling rate (max) (MBits) | 1 | Fault protection (V) | -70 to 70 |
Common-mode range (V) | -7 to 12 | Number of nodes | 320 |
Features | Fault protection | Isolated | No |
Supply current (max) (µA) | 6000 | Rating | Automotive |
Operating temperature range (°C) | -40 to 125 |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte