Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
Bestellungen über
$5000
TI SN65HVD1782DR
Integrated circuit for industrial networking
Marken: Texas Instruments
Herstellerteil #: SN65HVD1782DR
Datenblatt: SN65HVD1782DR Datenblatt (PDF)
Paket/Gehäuse: SOIC (D)-8
RoHS-Status:
Lagerzustand: 7.526 Stück, Neues Original
Produktart: Drivers, Receivers, Transceivers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
| Menge | Einzelpreis | Ext. Preis |
|---|---|---|
| 1 | $3,107 | $3,107 |
| 10 | $2,693 | $26,930 |
| 30 | $2,447 | $73,410 |
| 100 | $2,139 | $213,900 |
| 500 | $2,024 | $1012,000 |
| 1000 | $1,972 | $1972,000 |
Auf Lager: 7.526 Stck
SN65HVD1782DR Allgemeine Beschreibung
The SN65HVD178x devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. The devices are also robust to ESD events with high levels of protection to the human-body-model specification.
The SN65HVD178x devices combine a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common-mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from –40°C to 125°C. These devices are pin-compatible with the industry-standard SN75176 transceiver, making them drop-in upgrades in most systems.
These devices are fully compliant with ANSI TIA/EIA 485-A with a 5-V supply and can operate with a 3.3-V supply with reduced driver output voltage for low-power applications. For applications where operation is required over an extended common-mode voltage range, see the SN65HVD1785 (SLLS872) data sheet.
Funktionen
- Bus-Pin Fault Protection to:
- > ±70 V (SN65HVD1780, SN65HVD1781)
- > ±30 V (SN65HVD1782)
- Operation With 3.3-V to 5-V Supply Range
- ±16-kV HBM Protection on Bus Pins
- Reduced Unit Load for Up to 320 Nodes
- Failsafe Receiver for Open-Circuit, Short-Circuit, and Idle-Bus Conditions
- Low Power Consumption
- Low Standby Supply Current, 1 μA Maximum
- ICC 4-mA Quiescent Current During Operation
- Pin-Compatible With Industry-Standard SN75176
- Signaling Rates of 115 kbps, 1 Mbps, and up to 10 Mbps
- Create a Custom Design using the SN65HVD178x with the WEBENCH? Power Designer
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| feature-function | Line Transceiver | feature-data-rate | 10Mbps(Max) |
| feature-transmitter-communication-type | RS-485 | feature-receiver-communication-type | RS-485 |
| feature-number-of-transceivers | 1 | feature-number-of-transmitters | 1 |
| feature-number-of-receivers | 1 | feature-transmitter-signal-type | Differential |
| feature-receiver-signal-type | Differential | feature-number-of-drivers-per-line | 64@RS-485 |
| feature-number-of-receivers-per-line | 320 | feature-driving-mode | 3-State |
| feature-power-supply-type | Single | feature-minimum-single-supply-voltage-v | 3.15 |
| feature-maximum-single-supply-voltage-v | 5.5 | feature-minimum-dual-supply-voltage-v | |
| feature-maximum-dual-supply-voltage-v | feature-maximum-supply-current-ma | 6 | |
| feature-packaging | Tape and Reel | feature-rad-hard | |
| feature-pin-count | 8 | feature-supplier-package | SOIC |
| feature-standard-package-name1 | SO | feature-cecc-qualified | No |
| feature-esd-protection | Yes | feature-escc-qualified | |
| feature-military | No | feature-aec-qualified | No |
| feature-aec-qualified-number | feature-auto-motive | No | |
| feature-p-pap | No | feature-eccn-code | EAR99 |
| feature-svhc | No | feature-svhc-exceeds-threshold | No |
| Number of receivers | 1 | Number of transmitters | 1 |
| Duplex | Half | Supply voltage (nom) (V) | 3.3, 5 |
| Signaling rate (max) (MBits) | 10 | Fault protection (V) | -30 to 30 |
| Common-mode range (V) | -7 to 12 | Number of nodes | 64 |
| Isolated | No | Supply current (max) (µA) | 6000 |
| Rating | Catalog |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The SN65HVD1782DR is a high-speed controller area network (CAN) transceiver chip designed for industrial applications. It has a wide voltage range and high transient protection, making it suitable for harsh environments. The chip provides reliable communication between microcontrollers and CAN networks, offering error detection and fast data rates.
-
Equivalent
The equivalent products of SN65HVD1782DR chip are MAX13080E or MAX13086E. These chips are also RS-485/RS-422 transceivers with similar features and functions, suitable for industrial applications requiring high-speed communication over long distances. -
Features
The SN65HVD1782DR is a CAN transceiver with advanced low-power management features, designed for use in automotive and industrial applications. It supports a wide supply voltage range, from 3.3V to 5V, and has high ESD protection levels for reliable communication in harsh environments. -
Pinout
The SN65HVD1782DR is a 8-pin RS-485 half-duplex transceiver IC. It features a wide input common-mode range for reliable communication in noisy environments, over-voltage protection, and thermal protection. It is commonly used in industrial communication networks. -
Manufacturer
Texas Instruments is the manufacturer of the SN65HVD1782DR. It is a global semiconductor company that designs, manufactures, and sells analog and embedded processing chips. Founded in 1930, Texas Instruments is headquartered in Dallas, Texas, and is one of the largest semiconductor manufacturers in the world. -
Application Field
The SN65HVD1782DR is commonly used in a variety of automotive applications such as CAN bus systems, body control modules, powertrain systems, and in-vehicle networking. It is also widely used in industrial automation for communication between devices and controllers, as well as in commercial vehicle applications. -
Package
The SN65HVD1782DR chip is available in a surface-mount SOIC-8 package. It is in the form of an integrated circuit (IC) and has a size of 4.9mm x 3.9mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
