Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
ST STM32F101T6U6A
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D Access Line
Marken: STMicroelectronics, Inc
Herstellerteil #: STM32F101T6U6A
Datenblatt: STM32F101T6U6A Datasheet (PDF)
Paket/Gehäuse: QFN-36
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 2315 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMSTM32F101T6U6A Allgemeine Beschreibung
The STM32F101x4 and STM32F101x6 Low-density access line family incorporates the high-performance ARM Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory of 16 to 32 Kbytes and SRAM of 4 to 6 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (one I2C, one SPI, and two USARTs), one 12-bit ADC and up to two general-purpose 16-bit timers.The STM32F101xx Low-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F101xx Low-density access line family includes devices in three different packages ranging from 36 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F101xx Low-density access line microcontroller family suitable for a wide range of applications such as application control and user interface, medical and handheld equipment, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, Video intercoms, and HVACs.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Funktionen
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 16 to 32 Kbytes of Flash memory
- 4 to 6 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1 μs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 51 fast I/O ports
- 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 5 timers
- Up to two16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
- 2 watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to 4 communication interfaces
- 1 x I2C interface (SMBus/PMBus)
- Up to 2 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- 1 × SPI (18 Mbit/s)
- CRC calculation unit, 96-bit unique ID
- ECOPACK®packages
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
| RoHS: | Details | Series: | STM32F101T6 |
| Mounting Style: | SMD/SMT | Package / Case: | UFQFPN-36 |
| Core: | ARM Cortex M3 | Program Memory Size: | 32 kB |
| Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
| Maximum Clock Frequency: | 36 MHz | Number of I/Os: | 26 I/O |
| Data RAM Size: | 6 kB | Supply Voltage - Min: | 2 V |
| Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
| Brand: | STMicroelectronics | Data RAM Type: | SRAM |
| Height: | 0.88 mm | Interface Type: | I2C, SPI, USART |
| Length: | 6 mm | Moisture Sensitive: | Yes |
| Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 2 Timer |
| Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
| Program Memory Type: | Flash | Factory Pack Quantity: | 2940 |
| Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
| Width: | 6 mm |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The STM32F101T6U6A is a microcontroller chip developed by STMicroelectronics. It belongs to the STM32F1 series of 32-bit ARM Cortex-M3 processors and has a TSSOP20 package. It offers a wide range of features, including a high-performance CPU, various peripherals, ample Flash and RAM memories, and low power consumption. It is commonly used in various applications, such as industrial control systems, consumer electronics, and automotive applications.
-
Equivalent
Some equivalent products of STM32F101T6U6A chip include STM32F101T6U7AL, STM32F101T6U6TR, and STM32F101T6U6AQ microcontrollers. These chips are part of the STM32F1 series and offer similar features and capabilities. -
Features
The STM32F101T6U6A is a microcontroller, featuring a 32-bit ARM Cortex-M3 core, with a clock frequency of up to 72 MHz. It has 64KB flash memory, 16KB RAM, and a wide range of peripherals including timers, communication interfaces, ADCs, and GPIOs. It operates on low power consumption and supports real-time performance. -
Pinout
The STM32F101T6U6A microcontroller has 100 pins. It is a member of the STM32F1 series, based on the ARM Cortex-M3 core. It offers various peripherals and functions such as USART, SPI, I2C, PWM, ADC, and GPIO. -
Manufacturer
The STM32F101T6U6A is manufactured by STMicroelectronics, which is a multinational company that designs and manufactures semiconductor solutions. It is a leading manufacturer of microcontrollers like the STM32 series, offering a wide range of features and functionality for various applications. -
Application Field
The STM32F101T6U6A microcontroller can be used in a variety of application areas, including industrial automation, consumer electronics, medical devices, and automotive systems. It offers high performance, wide connectivity options, and advanced features, making it suitable for various embedded applications that require efficient processing, real-time control, and connectivity capabilities. -
Package
The STM32F101T6U6A chip has a LQFP package type, a 100-pin form, and a size of 14x14 mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
As a long-time customer, I continue to be impressed by Ovaga's attention to detail and exceptional customer service.