ST STM32F101VDT6
ARM Microcontrollers - MCU 32BIT Cortex M3 H/D ACCESS USB MCU
Marken: STMicroelectronics, Inc
Herstellerteil #: STM32F101VDT6
Datenblatt: STM32F101VDT6 Datasheet (PDF)
Paket/Gehäuse: LQFP-100
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 2236 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMSTM32F101VDT6 Allgemeine Beschreibung
The STM32F101xC, STM32F101xD and STM32F101xE access line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 48 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.The STM32F101xx high-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F101xx high-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems and video intercom.
Funktionen
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 48 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration capability
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- 1 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA
- 12-channel DMA controller
- Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex-M3 Embedded Trace Macrocell™
- Up to 9 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counters
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to 10 communication interfaces
- Up to 2 x I2C interfaces (SMSTM32F101xC, STM32F101xD, STM32F101xE7816 interface, LIN, IrDA capability, modem control)
- Up to 3 SPIs (18 Mbit/s)
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F101VD |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-100 |
Core: | ARM Cortex M3 | Program Memory Size: | 384 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 36 MHz | Number of I/Os: | 80 I/O |
Data RAM Size: | 48 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 1.4 mm | Interface Type: | I2C, SPI, USART |
Length: | 14 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 6 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 540 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 14 mm |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The STM32F101VDT6 is a microcontroller chip in the STM32F1 series by STMicroelectronics. It is based on the ARM Cortex-M3 core and offers a range of features for application development. The chip includes 256KB of Flash memory, 64KB of RAM, and various peripherals such as timers, ADCs, UARTs, and GPIOs. It is commonly used in embedded systems, IoT devices, and other applications requiring moderate processing power and low power consumption.
-
Equivalent
Some equivalent products to the STM32F101VDT6 chip include the STM32F101VCT6, STM32F101RCT6, STM32F101C6T6, STM32F101CBT6, and STM32F101RBT6. These chips are part of the STM32F101 series and offer similar features and functionality. -
Features
The STM32F101VDT6 is a microcontroller with the following features: 32-bit ARM Cortex-M3 core, 256KB flash memory, 64KB SRAM, 5 UARTs, 3 I2C interfaces, 2 SPI interfaces, 37 GPIO pins, 12-channel ADC, 12-bit DAC, multiple timers, and a wide range of communication and peripheral options. -
Pinout
The STM32F101VDT6 is a microcontroller with a 100-pin package count. It is part of the STM32F1 series from STMicroelectronics. The specific pin functions are detailed in the datasheet provided by the manufacturer. -
Manufacturer
The STM32F101VDT6 is manufactured by STMicroelectronics. It is a multinational semiconductor manufacturer that designs and produces a wide range of integrated circuits and solutions for various industries including automotive, consumer electronics, and industrial applications. -
Application Field
The STM32F101VDT6 is a microcontroller with a 32-bit ARM Cortex-M3 core. It is commonly used in various applications such as industrial control systems, motor control, consumer electronics, and communication devices. It provides features like high performance, low power consumption, and a wide range of peripherals, making it suitable for a diverse range of applications. -
Package
The STM32F101VDT6 is a microcontroller chip that comes in a LQFP (Low-Profile Quad Flat Package) package type. It has a 100-pin form with a size of 14mm x 14mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte
The components were of average quality, but the delivery arrived sooner than expected.