ST STM32F302VET6
ARM Microcontrollers - MCU Mainstream Mixed signals MCUs Arm Cortex-M4 core DSP & FPU, 512 Kbytes of Flash
Marken: ST
Herstellerteil #: STM32F302VET6
Datenblatt: STM32F302VET6 Datasheet (PDF)
Paket/Gehäuse: LQFP100
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 2566 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMSTM32F302VET6 Allgemeine Beschreibung
The STM32F302xD/E family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 64-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses.The devices offer two fast 12-bit ADCs (5 Msps), four comparators, two operational amplifiers, one DAC channel, a low-power RTC, up to two general-purpose 16-bit timers, one general-purpose 32-bit timer, and one timer dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.The STM32F302xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F302xD/E family offers devices in different packages ranging from 64 to 144 pins.Depending on the device chosen, different sets of peripherals are included.ST-LINK/V2 in-circuit debugger/programmer for ST.STM32 Nucleo-64 development board with STM32F302.Discovery kit with STM32F303VC MCU.Discovery kit with STM32F334C8 MCU.Evaluation board with STM32F303VE MCU.
Funktionen
- Core: ARM®Cortex®-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, DSP instruction and MPU (memory protection unit)
- Operating conditions:
- VDD, VDDAvoltage range: 2.0 V to 3.6 V
- Memories
- Up to 512 Kbytes of Flash memory
- 64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes.
- Flexible memory controller (FSMC) for static memories, with four Chip Select
- CRC calculation unit
- Reset and supply management
- Power-on/Power-down reset (POR/PDR)
- Programmable voltage detector (PVD)
- Low-power modes: Sleep, Stop and Standby
- VBATsupply for RTC and backup registers
- Clock management
- 4 to 32 MHz crystal oscillator
- 32 kHz oscillator for RTC with calibration
- Internal 8 MHz RC with x 16 PLL option
- Internal 40 kHz oscillator
- Up to 115 fast I/Os
- All mappable on external interrupt vectors
- Several 5 V-tolerant
- Interconnect matrix
- 12-channel DMA controller
- Two ADCs 0.20 μs (up to 18 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V
- One 12-bit DAC channels with analog supply from 2.4 to 3.6 V
- Four ultra-fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V
- Two operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
- Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
- Up to 11 timers:
- One 32-bit timer and two 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- One 16-bit 6-channel advanced-control timers, with up to six PWM channels, deadtime generation and emergency stop
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Supply Voltage Min Volt | 2.0 | Supply Voltage Max Volt | 3.6 |
Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
Core | Arm Cortex-M4 | ECCN US | 3A991.a.2 |
ECCN EU | NEC | Packing Type | Tray |
RoHs compliant | Ecopack2 | Grade | Industrial |
Package Name | LQFP 100 14x14x1.4 mm |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The STM32F302VET6 chip is a microcontroller based on the ARM Cortex-M4 core. It features a maximum operating frequency of 72 MHz and includes various peripherals such as GPIO, timers, communication interfaces (UART, SPI, I2C), analog-to-digital converter, and more. It is commonly used in embedded systems and IoT applications due to its low power consumption, advanced features, and easy programming capabilities.
-
Equivalent
The equivalent products of the STM32F302VET6 chip are the STM32F302VETx series microcontrollers, including the STM32F302VET6, STM32F302VEY6, and STM32F302VEC6. These microcontrollers have similar features and specifications, allowing for alternative options in designs and applications. -
Features
The STM32F302VET6 is a microcontroller with 64KB flash memory, 16KB RAM, and a maximum clock speed of 72MHz. It has a 32-bit ARM Cortex-M4 core, built-in USB 2.0 full-speed interface, and various communication interfaces such as SPI, I2C, USART, and CAN. It also includes multiple timers, ADCs, and GPIO pins for versatile applications. -
Pinout
The STM32F302VET6 is a microcontroller with 100 pins. It is part of the STM32F3 series, which is based on the ARM Cortex-M4 core. It offers various functions such as ADC, PWM, UART, I2C, SPI, and timers, making it suitable for a wide range of applications in the industrial and consumer sectors. -
Manufacturer
The manufacturer of the STM32F302VET6 is STMicroelectronics. It is a multinational semiconductor company headquartered in Switzerland. STMicroelectronics designs, develops, manufactures, and markets a broad range of microcontrollers, microprocessors, sensors, power management ICs, and other electronic components used in various industries including automotive, industrial, and consumer electronics. -
Application Field
The STM32F302VET6 microcontroller is commonly used in various application areas such as industrial control systems, motor drives, power management, smart appliances, and Internet of Things (IoT) devices. -
Package
The STM32F302VET6 chip comes in a 100-pin LQFP (Low-Profile Quad Flat Package) form. The package size is typically 14mm x 14mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte
We've seen a noticeable improvement in the performance of our products since switching to Ovaga's electronic components. Highly satisfied!