ST STM32F401RET6TR
ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 84MHz 512KB (512K x 8) FLASH 64-LQFP (10x10)
Marken: STMicroelectronics, Inc
Herstellerteil #: STM32F401RET6TR
Datenblatt: STM32F401RET6TR Datasheet (PDF)
Paket/Gehäuse: 64-LQFP
Produktart: Embedded-Prozessoren und Controller
RoHS-Status:
Lagerzustand: 3617 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMSTM32F401RET6TR Allgemeine Beschreibung
The STM32F401xD/xE devices are based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 84 MHz. Its Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.The STM32F401xD/xE incorporate high-speed embedded memories (512 Kbytes of Flash memory, 96 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.Evaluation board with STM32F439NI MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.Discovery kit with STM32F407VG MCU * New order c.Evaluation board with STM32F429NI MCU.STM32 Nucleo-64 development board with STM32F401.
Funktionen
- Core: ARM®32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories
- up to 512 Kbytes of Flash memory
- up to 96 Kbytes of SRAM
- Clock, reset and supply management
- 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Power consumption
- Run: 146 μA/MHz (peripheral off)
- Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ @ 25C; 65 μA max @25 °C
- Stop (Flash in Deep power down mode, fast wakeup time): down to 10 μA @ 25 °C; 30 μA max @25 °C
- Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V
- VBATsupply for RTC: 1 μA @25 °C
- 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- Up to 11 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M4 Embedded Trace Macrocell™
- Up to 81 I/O ports with interrupt capability
- Up to 78 fast I/Os up to 42 MHz
- All I/O ports are 5 V-tolerant
- Up to 12 communication interfaces
- Up to 3 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
- Up to 4 SPIs (up to 42Mbit/s at fCPU= 8
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F401RE |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-64 |
Core: | ARM Cortex M4 | Program Memory Size: | 512 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 84 MHz | Number of I/Os: | 50 I/O |
Data RAM Size: | 96 kB | Supply Voltage - Min: | 1.7 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | MouseReel |
Brand: | STMicroelectronics | Moisture Sensitive: | Yes |
Product Type: | ARM Microcontrollers - MCU | Factory Pack Quantity: | 1000 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Unit Weight: | 0.012335 oz |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The STM32F401RET6TR chip is a microcontroller based on the ARM Cortex-M4 core. It is part of STMicroelectronics' STM32F4 series and is designed for high-performance applications. The chip features a maximum clock speed of 84 MHz, 512 KB of flash memory, and 96 KB of SRAM. It also includes various communication interfaces, such as UART, SPI, and I2C, making it suitable for a wide range of embedded systems projects.
-
Equivalent
Some equivalent products of the STM32F401RET6TR chip include STM32F401REY6TR, STM32F401RET6, STM32F401RET6TRMP, and STM32F401RET6TRM. -
Features
The STM32F401RET6TR is a microcontroller part of the STM32F4 series. It features a high-performance ARM Cortex-M4 processor running at 84 MHz, 512 KB flash memory, 96 KB RAM, and a wide range of peripherals including UART, SPI, I2C, USB, and ADC interfaces. It is suitable for a wide range of applications requiring advanced processing capabilities and connectivity options. -
Pinout
The STM32F401RET6TR microcontroller has 64 pins. It is a 32-bit ARM Cortex-M4 processor based chip that offers a range of embedded connectivity options and high-performance computing capabilities in a small package. -
Manufacturer
The STM32F401RET6TR is manufactured by STMicroelectronics. It is a multinational semiconductor company and one of the largest independent semiconductor manufacturers worldwide. STMicroelectronics designs, develops, manufactures, and markets a wide range of semiconductors and integrated circuits for various applications, including automotive, industrial, personal electronics, and telecommunications. They specialize in microcontrollers, power semiconductors, and other electronic components. -
Application Field
The STM32F401RET6TR microcontroller is commonly used in applications such as industrial control systems, motor control, robotics, consumer electronics, and Internet of Things (IoT) devices. -
Package
The STM32F401RET6TR chip is in a LQFP package. It has a form factor of QFP and a size of 7mm x 7mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte
I would highly recommend Ovaga to anyone in need of electronic components for professional use.