ST STM32G441KBT6

STM32G441KBT6 Allgemeine Beschreibung

The STM32G441xB devices are based on the high-performance Arm®Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 170 MHz.The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm single-precision data-processing instructions and all the data types. It also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security.These devices embed high-speed memories (128 Kbytes of Flash memory, and 32 Kbytes of SRAM), an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.The devices also embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, securable memory area and proprietary code readout protection.The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC for trigonometric functions and FMAC unit for filter functions).They offer two fast 12-bit ADCs (5 Msps), four comparators, three operational amplifiers, four DAC channels (2 external and 2 internal), an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timers, two 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer.They also feature standard and advanced communication interfaces such as:- Three I2Cs- Three SPIs multiplexed with two half duplex I2Ss- Three USARTs, one UART and one low-power UART.- One FDCAN- One SAI- USB device- UCPDThe STM32G441xB devices embed an AES.The devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.Some independent power supplies are supported including an analog independent supply input for ADC, DAC, OPAMPs and comparators. A VBATinput allows backup of the RTC and the registers.The STM32G441xB family offers 9 packages from 32-pin to 100-pin.

Funktionen

• Includes ST state-of-the-art patented technology
  • Core: Arm^® 32-bit Cortex^®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions
  • Operating conditions:
    
    • V_DD, V_DDA voltage range: 1.71 V to 3.6 V
  • Mathematical hardware accelerators
    
    • CORDIC for trigonometric functions acceleration
    
    
    • FMAC: filter mathematical accelerator
  • Memories
    
    • 128 Kbytes of Flash memory with ECC support, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP
    
    
    • 22 Kbytes of SRAM, with hardware parity check implemented on the first 16 Kbytes
    
    
    • Routine booster: 10 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM)
  • Reset and supply management
    
    • Power-on/power-down reset (POR/PDR/BOR)
    
    
    • Programmable voltage detector (PVD)
    
    
    • Low-power modes: sleep, stop, standby and shutdown
  • Clock management
    
    • 4 to 48 MHz crystal oscillator
    
    
    • Internal 16 MHz RC with PLL option (± 1%)
  • Up to 86 fast I/Os
    
    • All mappable on external interrupt vectors
    
    
    • Several I/Os with 5 V tolerant capability
  • Interconnect matrix
  • 12-channel DMA controller
  • 2 x ADCs 0.25 µs (up to 23 channels). Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range
  • 4 x 12-bit DAC channels
    
    • 2 x buffered external channels 1 MSPS
    
    
    • 2 x unbuffered internal channels 15 MSPS

Anwendung

• The STM32G441KBT6 microcontroller can be used in a wide range of applications, including but not limited to:
• Industrial control and automation systems
• Motor control and robotics
• Power management and grid monitoring systems
• Internet of Things (IoT) devices and smart home applications
• Portable and battery-powered devices
• Medical and healthcare equipment
• Automotive and transportation systems
• Consumer electronics and gaming devices

Spezifikationen