Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
TI TPS259470ARPWR
Electronic Fuse Regulator 5.5A 10-VQFN-HR (2x2)
Marken: TI
Herstellerteil #: TPS259470ARPWR
Datenblatt: TPS259470ARPWR Datenblatt (PDF)
Paket/Gehäuse: VQFN-10
RoHS-Status:
Lagerzustand: 1672 Stück, Neues Original
Produktart: Hot Swap Voltage Controllers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Alle Preise sind in USD
| Menge | Einzelpreis | Ext. Preis |
|---|---|---|
| 1 | $1,067 | $1,067 |
| 10 | $0,905 | $9,050 |
| 30 | $0,816 | $24,480 |
| 100 | $0,714 | $71,400 |
In Stock:1672 PCS
TPS259470ARPWR Allgemeine Beschreibung
The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices well suited for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to ensure almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.
Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor.
The devices are available in a 2-mm × 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
Funktionen
- Wide operating input voltage range: 2.7 V to 23 V
- 28-V absolute maximum
- Withstands negative voltages up to –15 V
- Integrated back-to-back FETs with low on-resistance: RON = 28.3 mΩ (typ.)
- Ideal diode operation with true reverse current blocking
- Fast overvoltage protection
- Overvoltage clamp (OVC) with pin-selectable threshold (3.8 V, 5.7 V, 13.8 V) and 5-µs (typ.) response time OR
- Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
- Overcurrent protection with load current monitor output (ILM)
- Active current limit OR circuit-breaker options
- Adjustable threshold (ILIM) 0.5 A–6 A
- ±10% accuracy for ILIM > 1 A
- Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
- Output load current monitor accuracy: ±6% (IOUT ≥ 1 A)
- Fast-trip response for short-circuit protection
- 500-ns (typ.) response time
- Adjustable (2 × ILIM) and fixed thresholds
- Active high enable input with adjustable undervoltage lockout threshold (UVLO)
- Adjustable output slew rate control (dVdt)
- Overtemperature protection
- Digital outputs
- Priority power MUX control (AUXOFF) and fault indication (FLT) or
- Power Good indication (PG) with adjustable threshold (PGTH)
- UL 2367 recognition
- File No. E339631
- RILM ≥ 750 Ω
- IEC 62368-1 CB certified
- Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| FET | Internal | Ron (typ) (mΩ) | 28 |
| Vin (min) (V) | 2.7 | Vin (max) (V) | 23 |
| Vabsmax_cont (V) | 28 | Current limit (min) (A) | 0.5 |
| Current limit (max) (A) | 6 | Overcurrent response | Circuit breaker, current limiting |
| Fault response | Auto-retry, Latch-off | Soft start | Adjustable |
| Overvoltage response | Clamp, Cut-off | Features | Current monitoring, Fault output, Power good signal, Reverse current blocking always, Reverse polarity protection |
| UL recognition | IEC62368, UL2367 | Rating | Catalog |
| Device type | eFuses and hot swap controllers |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The TPS259470ARPWR chip is an advanced power distribution switch that offers various protection features, such as overcurrent and short-circuit protection, to ensure the safety of circuitry. It supports up to 5.7V voltage operation and is suitable for applications that require robust power management. The chip has a compact design and low on-resistance, making it an ideal choice for various electronic devices.
-
Equivalent
An equivalent product of the TPS259470ARPWR chip is the TPS25944ARPWR. -
Features
The TPS259470ARPWR is a smart protection switch with programmable current limit. It provides on-chip protection against overcurrent, reverse current, and overvoltage conditions. It also offers an adjustable current limit threshold and supports load disconnect/reconnect functionality to protect sensitive components and systems. -
Pinout
The TPS259470ARPWR is a 30 V, 0.4 A load switch with over-voltage protection. It has a 6-pin package with the following functions: GND (ground), VIN (input voltage), EN (enable), OUT (output), OC (over-current), and OVP (over-voltage protection). -
Manufacturer
The TPS259470ARPWR is manufactured by Texas Instruments. It is an American semiconductor company that designs and manufactures a wide range of electronic components and integrated circuits. -
Application Field
The TPS259470ARPWR is a power switch that can be used in various applications such as USB Type-C and USB 3.0 power delivery, notebook computers, docking stations, and portable devices. It provides overcurrent protection and allows for safe and efficient power management in these applications. -
Package
The TPS259470ARPWR chip is available in a package type of 20-DSBGA (3x3) with a form of CSP (Chip Scale Package). The size of the chip is approximately 1.61mm x 1.61mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
