TI WL1835MODGBMOCR
Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.4GHz Surface Mount
Marken: TI
Herstellerteil #: WL1835MODGBMOCR
Datenblatt: WL1835MODGBMOCR Datenblatt (PDF)
Paket/Gehäuse: SMD
Produktart: RF Transceiver Modules
RoHS-Status:
Lagerzustand: 600 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMWL1835MODGBMOCR Allgemeine Beschreibung
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
Funktionen
- General
- Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
- Quick hardware design with TI module collateral and reference designs
- Operating temperature: –20°C to +70°C
- Small form factor: 13.3 × 13.4 × 2 mm
- 100-pin MOC package
- FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
- Wi-Fi
- WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
- 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
- 2.4-GHz MRC support for extended range
- Fully calibrated: production calibration not required
- 4-bit SDIO host interface support
- Wi-Fi direct concurrent operation (multichannel, multirole)
- Bluetooth and Bluetooth low energy (WL183xMOD only)
- Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support of SBC encoding + A2DP
- Dual-mode Bluetooth and Bluetooth low energy
- TI’s Bluetooth and Bluetooth low energy certified stack
- Key benefits
- Reduces design overhead
- Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
- Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
- Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
- Lowest Wi-Fi power consumption in connected idle (< 800 µA)
- Configurable wake on WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Processor | External MPU | Type | Module, Transceiver |
Protocols | Combo (Wi-Fi + Bluetooth), Wi-Fi 2.4 GHz | Throughput (max) (MBits) | 100 |
Security | Networking security (WPA3) | Features | 2x2 MIMO, 802.11bgn, AP, Bluetooth, Bluetooth low energy, COEX, STA, Wi-Fi direct mode |
Certifications | CE, FCC, ISED, MIC | Operating temperature range (°C) | -20 to 70 |
Rating | Catalog |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The WL1835MODGBMOCR chip is a wireless connectivity module developed by Texas Instruments. It is designed for embedded applications requiring Wi-Fi and Bluetooth connectivity. The chip integrates a Wi-Fi transceiver and a Bluetooth transceiver, enabling devices to communicate wirelessly with other devices or networks. It offers high-performance Wi-Fi and Bluetooth functionality in a compact form factor, making it ideal for various IoT and smart home applications.
-
Equivalent
There are no direct equivalent products of the WL1835MODGBMOCR chip. However, similar alternatives include the ESP32 and nRF52840, which offer similar functionalities and features for wireless communication and IoT applications. -
Features
The WL1835MODGBMOCR is a Wi-Fi and Bluetooth module by Texas Instruments. Its features include support for 2.4 and 5 GHz bands, Wi-Fi Direct and Soft AP modes, Bluetooth Low Energy (BLE) connectivity, and Bluetooth Classic support. It also offers integrated power management and enhanced security capabilities. -
Pinout
The pin count of the WL1835MODGBMOCR module is 88. It is a wireless network module that integrates Wi-Fi, Bluetooth, and Bluetooth Low Energy (BLE) functionalities. -
Manufacturer
The manufacturer of the WL1835MODGBMOCR is Texas Instruments. It is an American technology company that specializes in designing and manufacturing semiconductors and various integrated circuits. -
Application Field
The WL1835MODGBMOCR is a wireless connectivity module typically used in applications such as home automation, industrial automation, smart grids, healthcare, and asset tracking. It enables wireless communication over Bluetooth and Wi-Fi, making it suitable for various IoT devices requiring connectivity and data transfer capabilities. -
Package
The WL1835MODGBMOCR chip has a Ball Grid Array (BGA) package type, with a form factor of 7.5mm x 7.5mm.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte