Bilder dienen nur zur Referenz. Siehe Produktspezifikationen.
Microchip APT5010LVRG
Trans MOSFET N-CH 500V 47A 3-Pin(3+Tab) TO-264 Tube
Marken: Microchip Technology, Inc
Herstellerteil #: APT5010LVRG
Datenblatt: APT5010LVRG Datasheet (PDF)
Paket/Gehäuse: TO264
Produktart: Transistoren
RoHS-Status:
Lagerzustand: 2563 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
BOMAPT5010LVRG Allgemeine Beschreibung
Power MOS 8™ is a family of high speed, high voltage (500-1200 V) N-channelswitch-mode power transistors with lower EMI characteristics and lower costcompared to previous generation devices. These MOSFETs / FREDFETs have beenoptimized for both hard and soft switching in high frequency, high voltageapplications rated above 500 W.
The Power MOS 8™ series is a result of extensive research into quiet switching.Input and reverse transfer capacitance values as well as their ratio were setat specific values to achieve quiet switching with minimal switching loss. ThePower MOS 8™ series of devices are inherently quiet switching, stable whenconnected in parallel, very efficient, and lower cost than previousgenerations.
Power MOS 7® is a family of low loss, high voltage, N-Channel enhancementmode power MOSFETS. Both conduction and switching losses are addressed withPower MOS 7® by significantly lowering RDS(ON)and Qg. Power MOS 7® combineslower conduction and switching losses along with exceptionally fast switchingspeeds.
Power MOS V® can still provide the best trade-off between performance andcost in some applications. Power MOS V® utilizes a low resistance aluminummetal gate structure. This allows for faster gate signal propagation than ispossible with conventional polysilicon gate structures. The result is extremelylow internal chip equivalent gate resistances (EGR) that are up to an order ofmagnitude lower than competitive devices which enables uniform high speedswitching across the entire chip.
Body Diode Options
MOSFETs and FREDFETs are available in all voltage ratings. A FREDFET is aMOSFET with a faster recovery intrinsic body diode. This results in improvedreliability in ZVS circuits due to shorter minority carrier lifetime andincreased commutation dv/dt ruggedness. If a fast recovery body diode is notneeded, MOSFET versions are available.
Funktionen
- Power Semiconductors, Power Modules and RF Power MOSFETs Catalog
- Eliminating Parasitic Oscillation between Parallel MOSFETs
- High Frequency Resonant Half Bridge
- Improved Power MOSFETS Boost Efficiency IN A 3.5kw Single Phase PFC
- Introduction to MOSFETs
- Latest Technology PT IGBTs vs. Power MOSFETs
- Making Use of Gate Charge Information In MOSFET and IGBT Data Sheets
- Optimizing MOSFET and IGBT Gate Current to Minimize dv/dt Induced Failures in SMPS Circuits
- Turn Off Snubber Design for High Frequency Modules
- VDS(on) VCE(sat) Measurement
Spezifikationen
| Parameter | Wert | Parameter | Wert |
|---|---|---|---|
| Product Type | Silicon Discrete MOSFET | Continuous Drain Current at 25°C (A) [max] | 20 - 103 |
| Package Type(s) | D3PAK, SOT-227, T-MAX, TO-247, TO-264, TO-264MAX | Continuous Drain Current at 25°C [I(D)] (A) [family max] | 103 |
| feature-category | Power MOSFET | feature-material | |
| feature-process-technology | Power MOS V | feature-configuration | Single |
| feature-channel-mode | Enhancement | feature-channel-type | N |
| feature-number-of-elements-per-chip | 1 | feature-maximum-drain-source-voltage-v | 500 |
| feature-maximum-gate-source-voltage-v | ±30 | feature-maximum-gate-threshold-voltage-v | |
| feature-maximum-continuous-drain-current-a | 47 | feature-maximum-drain-source-resistance-mohm | 100@10V |
| feature-typical-gate-charge-vgs-nc | 312@10V | feature-typical-gate-charge-10v-nc | 312 |
| feature-typical-input-capacitance-vds-pf | 7400@25V | feature-typical-output-capacitance-pf | |
| feature-maximum-power-dissipation-mw | 520000 | feature-packaging | Tube |
| feature-rad-hard | feature-pin-count | 3 | |
| feature-supplier-package | TO-264 | feature-standard-package-name1 | |
| feature-cecc-qualified | No | feature-esd-protection | |
| feature-escc-qualified | feature-military | No | |
| feature-aec-qualified | No | feature-aec-qualified-number | |
| feature-auto-motive | No | feature-p-pap | No |
| feature-eccn-code | EAR99 | feature-svhc | |
| feature-svhc-exceeds-threshold | No |
Versand
| Versandart | Versandgebühr | Vorlaufzeit | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
 |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
| Zahlungsbedingungen | Handgebühr | |
|---|---|---|
 |
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. |
 |
Paypal | 4,0 % Servicegebühr wird berechnet. |
 |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. |
 |
Western Union | charge US.00 banking fee. |
 |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
![Produkt]( "Produkt")
Schritt1 :Produkt
-
![Vakuumverpackung]( "Vakuumverpackung")
Schritt2 :Vakuumverpackung
-
![Antistatikbeutel]( "Antistatikbeutel")
Schritt3 :Antistatikbeutel
-
![Individuelle Verpackung]( "Individuelle Verpackung")
Schritt4 :Individuelle Verpackung
-
![Verpackungskartons]( "Verpackungskartons")
Schritt5 :Verpackungskartons
-
![Barcode-Versandetikett]( "Barcode-Versandetikett")
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Teilpunkte
-
The APT5010LVRG chip is a high voltage MOSFET transistor designed for power switching applications. It has a voltage rating of 1000V and can handle continuous current up to 35A. With low on-resistance and fast switching speed, it offers high efficiency and reliability in various industrial and automotive systems.
-
Equivalent
The APT5010LVRG chip is equivalent to IRFS3207ZPBF, IRL3705ZSPBF, and IPP50R199CP. -
Features
The APT5010LVRG is a power MOSFET designed with low on-resistance and fast switching speed. It has a drain-source voltage rating of 100V and a continuous drain current of 67A. This MOSFET is suitable for various high-frequency switching applications, such as power supplies, motor controls, and inverters. -
Pinout
The APT5010LVRG is a power MOSFET transistor with a TO-247 package. It has three pins: gate, drain, and source. The gate is used to control the flow of current between the drain and the source, making it suitable for power switching applications. -
Manufacturer
The manufacturer of the APT5010LVRG is Advanced Power Electronics Corp. (APEC). APEC is a semiconductor company specializing in the design, development, and production of power MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) and other power electronics components. -
Application Field
The APT5010LVRG is widely used in various applications including switching regulators, power management in industrial and consumer electronics, motor control, and battery charging systems. Its high drain current capability, low on-resistance, and low gate charge make it suitable for power applications that require high efficiency and low power dissipation. -
Package
The APT5010LVRG chip comes in a TO-247 package type, has a rectifier form, and has a size of 3.0 mm x 25.78 mm x 16.51 mm.
Datenblatt PDF
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
![Produkt]( "Produkt")
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
![quantity]( "quantity")
Die Mindestbestellmenge beginnt bei 1 Stück.
-
![shipping]( "shipping")
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
![Garantie]( "Garantie")
365 Tage Qualitätsgarantie für alle Produkte
The electronic components we received from Ovaga were exactly what we needed to complete our project.