Bestellungen über
$5000IS25LP064A-JMLE
Product IS25LP064A-JMLE is a NOR Flash Serial SPI Dual SPI Quad SPI 2.5V/3.3V 64M-bit 8M x 8 8ns 16-Pin SOIC W
Marken: ISSI, Integrated Silicon Solution Inc
Herstellerteil #: IS25LP064A-JMLE
Datenblatt: IS25LP064A-JMLE Datenblatt (PDF)
Paket/Gehäuse: 16-SOIC
Produktart: Speicher
RoHS-Status:
Lagerzustand: 8.603 Stück, Neues Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
IS25LP064A-JMLE Allgemeine Beschreibung
The wide operating voltage range of 2.7V to 3.6V makes the IS25LP064A-JMLE versatile and adaptable to a range of applications, from automotive to industrial to consumer electronics. Its reliable performance in temperatures ranging from -40°C to 105°C further extends its suitability for use in harsh environments where stability and durability are crucial
Funktionen
- Single Power Supply Operation
- - Low voltage range: 2.3 V - 3.6 V
- Memory Organization
- - IS25LQ016: 2048K x 8 (16 Mbit)
- Cost Effective Sector/Block Architecture
- - 16Mb : Uniform 4KByte sectors / Thirty-two uniform 64KByte blocks
- Serial Peripheral Interface (SPI) Compatible
- - Supports single-, dual- or quad-output
- - Supports SPI Modes 0 and 3
- - Maximum 50 MHz clock rate for normal read
- - Maximum 104 MHz clock rate for fast read
- - Maximum 208MHz clock rate equivalent Dual SPI
- - Maximum 400MHz clock rate equivalent Quad SPI
- Byte Program Operation
- - Typical 10 us/Byte
- Page Program (up to 256 Bytes) Operation
- - Maximum 0.7ms per page program
- Sector, Block or Chip Erase Operation
- - Sector Erase (4KB) -> 150ms (Typ)
- - Block Erase (64KB) -> 500ms (Typ)
- - Chip Erase -> 5s (Typ)
- Low Power Consumption
- - Max 12 mA active read current
- - Max 20 mA program/erase current
- - Max 30 uA standby current
- Hardware Write Protection
- - Protect and unprotect the device from write operation by Write Protect (WP#) Pin
- Software Write Protection
- - The Block Protect (BP3, BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
- High Product Endurance
- - Guaranteed 100,000 program/erase cycles per single sector
- - Minimum 20 years data retention
- Industrial Standard Pin-out and Package
- - 8-pin 208mil SOIC
- - 8-contact WSON
- - PDIP
- - 8-pin 208mil VSOP
- - Lead-free (Pb-free) package
- Additional 256-byte Security information one-time programmable (OTP) area
- Special protect function
- - Safe guard function (Appendix 1)
- - Sector unlock function (Appendix 2)
Spezifikationen
Parameter | Wert | Parameter | Wert |
---|---|---|---|
Package | Tube | Product Status | Discontinued at Digi-Key |
Programmabe | Verified | Memory Type | Non-Volatile |
Memory Format | FLASH | Technology | FLASH - NOR |
Memory Size | 64Mbit | Memory Organization | 8M x 8 |
Memory Interface | SPI - Quad I/O, QPI | Clock Frequency | 133 MHz |
Write Cycle Time - Word, Page | 800µs | Voltage - Supply | 2.3V ~ 3.6V |
Operating Temperature | -40°C ~ 105°C (TA) | Mounting Type | Surface Mount |
Package / Case | 16-SOIC (0.295", 7.50mm Width) | Supplier Device Package | 16-SOIC |
Base Product Number | IS25LP064 |
Versand
Versandart | Versandgebühr | Vorlaufzeit | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 Tage | |
REGISTRIERTE LUFTPOST | $20.00-$40.00 (0.50 KG) | 2-5 Tage |
Bearbeitungszeit: Die Versandkosten hängen von der jeweiligen Zone und dem Land ab.
Zahlung
Zahlungsbedingungen | Handgebühr | |
---|---|---|
Banküberweisung | Bankgebühr in Höhe von 30,00 USD wird berechnet. | |
Paypal | 4,0 % Servicegebühr wird berechnet. | |
Kreditkarte | 3,5 % Servicegebühr wird berechnet. | |
Western Union | charge US.00 banking fee. | |
Geldgramm | Bankgebühr in Höhe von 0,00 USD wird berechnet. |
Garantien
1. Die von Ihnen gekauften elektronischen Bauteile enthalten eine 365-tägige Garantie. Wir garantieren die Produktqualität.
2. Wenn einige der Artikel, die Sie erhalten haben, nicht von perfekter Qualität sind, würden wir verantwortungsvoll Ihre Rückerstattung oder Ersatz arrangieren. Die Artikel müssen jedoch in ihrem Originalzustand verbleiben.
Verpackung
-
Schritt1 :Produkt
-
Schritt2 :Vakuumverpackung
-
Schritt3 :Antistatikbeutel
-
Schritt4 :Individuelle Verpackung
-
Schritt5 :Verpackungskartons
-
Schritt6 :Barcode-Versandetikett
Alle Produkte werden in antistatischen Beuteln verpackt. Versand mit ESD-Antistatikschutz.
Auf dem äußeren ESD-Verpackungsetikett werden die Informationen unseres Unternehmens verwendet: Teilenummer, Marke und Menge.
Wir prüfen alle Waren vor dem Versand, stellen sicher, dass sich alle Produkte in gutem Zustand befinden und dass die Teile neu und original sind und mit dem Datenblatt übereinstimmen.
Nachdem alle Waren darauf überprüft wurden, dass nach dem Verpacken keine Probleme auftreten, werden wir sicher verpacken und per Global Express versenden. Es zeigt eine ausgezeichnete Durchstoß- und Reißfestigkeit sowie eine gute Dichtungsintegrität.
Wir bieten qualitativ hochwertige Produkte, durchdachten Service und eine Kundendienstgarantie
-
Wir haben reichhaltige Produkte, die Ihre unterschiedlichen Bedürfnisse erfüllen können.
-
Die Mindestbestellmenge beginnt bei 1 Stück.
-
Niedrigste internationale Versandgebühr beginnt ab 0,00 USD
-
365 Tage Qualitätsgarantie für alle Produkte